User manual BESAFE IZI COMFORT

[. . . ] Incorrect installation could endanger your child. Contents Vital information Preparing to install Forward-facing belt installation Removing the seat Positioning of the child Sleeping position Removing and refitting the cover Cleaning instructions Warning: potential misuse Important advice Guarantee Point of sale information 3 4 5 7 7 9 10 12 12 13 14 15 2 3 Preparing to install Crucial parts Release handle head rest Belt clamp (2x) Adjustable head rest Forward-facing belt installation It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG. ! 1- When mounting in the back seat of the vehicle, push the front seat of the vehicle forward as much as possible. When mounting in the front seat of the vehicle, adjust the back rest in an upright position. 2- Put the child seat on the seat of the vehicle. Unlock the belt clamps (1). Harness shoulder straps Harness buckle Belt tension indicator (if applicable) (1) Central adjuster Belt tensioner (2) Reclining knob (2x) 3- Release the release handle at the back of the head rest and push the head rest down while keeping the head rest upright (2). [. . . ] · By turning the reclining knob, the seat can be put in another position (12). (12) 6- When the child is positioned, place the shoulder straps over the child's shoulders and close the buckle: CLICK!(10) (10) 8 9 Removing and refitting the cover Refit the cover 1- Pull the head rest in the highest position. Mount the head rest cover and connect the hooks at the back side. Pull the harness straps through the holes. Connect the loose bottom part of the head rest fabric with the plastic part under the head rest. 2- Pull the harness straps through the opening of the seat cover and lock the harness buckle. Pull the crotch strap through the opening of the seat part. 3- Pull the loops of the harness straps from the bottom of the seat part through the openings to the hooks in the bottom of the seat. Hook both harness straps on the metal belt hooks and pull the straps firmly to ensure that they are correctly installed (14). ! · Make sure that the harness straps are fixed in the right way, after fitting the cover. Removing the cover 1- Pay attention when you remove the cover, as fitting the cover is done in the opposite way. 2- To remove the seat cover, the harness straps must be released at both sides. See red circle (13). (13) (14) 3- Start to take off the lower seat part and unhook both harness straps from the metal belt hooks. 4- The cover of the head rest can be taken off separately by disconnecting the hooks at the backside and pulling off the fabric to the front. 4- Mount the top part and then the shoulder parts. Mount the seat part and bring the seat cover under the rear parts of the sidewalls. 10 11 Cleaning instructions · The cover of the seat must be washed according to the instructions on the inside of the cover (15). (15) wash with similar colours Important advice · DO NOT attempt to dismantle, modify or add any part to the seat. Warranty will expire if non-original parts or accessories are used. · DO NOT use anything, such as a cushion, to raise the child seat off the passenger seat of the vehicle. In an accident the seat will not be able to protect your child in the right way. · Never leave your child unattended in the seat. · Make sure all passengers are informed about how to release your child in case of emergency. · An unoccupied child seat should always be fastened in the vehicle. · Make sure luggage or other objects are properly secured. Unsecured luggage may cause severe injuries to children and adults in case of accidents. [. . . ] Furthermore they are tested by independent test institutes. · Should this product prove faulty within 24 months of purchase due to materials or manufacturing fault, except covers and harness straps, please return it to the original place of purchase. · The guarantee is only valid when you use your seat appropriately and with care. Please contact your dealer, he will decide if the seat will be returned to the manufacturer for repair. [. . . ]