Detailed instructions for use are in the User's Guide.
[. . . ] 2 G Wake-up light Instructions for use . 2500 Lux (bei 15 cm Abstand) LED Technologie (Lebensdauer der LED: > 50 000 Stunden) 20 Lichtstufen mit Simulation von Morgenrot Automatischer RGB Farbwechsel mit individueller Farbfixierung Aus 2, 5, 10, 15, 20, 30, 45, 60 Minuten vor Alarm Maximale Lichtstärke bis zum Alarm: Lichtstufe 5, 10, 15, 20 1, 2, 5, 10, 20, 30 Minuten
Lichtweckerfunktion SonnenaufgangsFunktion Snooze-Dauer Sonnenuntergang2, 5, 10, 15, 20, 30, 45, 60 Minuten Funktion Gute-Nacht-Funk2, 5, 10, 15, 20, 30, 45, 60 Minuten tion (Sleep Radio) LCD-HintergrundAus, 1, 2, 3 beleuchtung 12h / 24h Umstellbar, 15 MinuUhrzeit ten Puffer bei Stromausfall
8
ENGLISH
Read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain. 3 Switching off the alarm when the alarm tone sounds. 6 Good night function (radio sleep timer). [. . . ] Use the / buttons to select the desired brightness of the sunrise at the alarm time (5, 10, 15 or 20). If you are woken up by light relatively quickly, then we recommend reducing the brightness. 3 Setting the display brightness
• When the device is switched on, press the Menu/Set button. Use the / buttons to select the desired brightness (OFF, 1, 2, or 3). Note Once the setting is made, it takes approx. 10 seconds for the currently configured display brightness to appear. This is because the display is automatically illuminated at the highest setting for 10 seconds each time a button is pressed (including the snooze function). 4 Setting the snooze duration
• When the device is switched on, press the Menu/Set button. Use the / buttons to select the desired snooze duration (1, 2, 5, 10, 20 or 30 minutes). 5 Switching the button tone on/off
• When the device is switched on, press the Menu/Set button. Use the / buttons to switch the button tone on (O N) or off (O F F). 1 Setting the alarm
The device features three alarm memory spaces that can be configured individually. When the device is switched on, keep pressing the ALARM button until the desired alarm memory space appears in the display (A 1 , A 2 or A 3). Press the / buttons until ON appears in the display. The hour display of the alarm flashes in the display. Use the / buttons to set the hour and confirm using the Menu/Set button. The minute display of the alarm flashes in the display. Use the / buttons to set the minute and confirm using the Menu/Set button. The set alarm is now activated and appears in the display. 2 Setting an alarm for each day (DA Y)
8. 3 Switching off the alarm when the alarm tone sounds
When the alarm sounds, press any button apart from Snooze. The alarm is now switched off and will only sound again at the set alarm time. [. . . ] Use the +/- buttons on the side to select the desired duration of the sunset (2, 5, 10, 15, 20, 30, 45 or 60 minutes), then wait for 5 seconds. Remove the mains adapter of the wake-up light from the socket. Press and hold both the Menu/Set button and the Light button on the device, which is now switched off, and reinsert the mains adapter of the wake-up light into the socket. The device has now been reset to the factory settings. [. . . ]