User manual BEURER WL 90

[. . . ] 2 G Wake-up light Instructions for use . 8 Irrtum und Änderungen vorbehalten ENGLISH Read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain. 15 Included in delivery • Wake-up light with cable antenna • Mains adapter • Instructions for use • Brief instructions 9 Dear customer, Thank you for choosing one of our products. Our name stands for high-quality, thoroughly tested products for applications related to heating, weight, blood pressure, body temperature, pulse, gentle therapy, massage, air and beauty. [. . . ] € Check the device, mains adapter and mains cable for damage. • Place the device on a firm , even surface. € Insert the mains adapter connector into the mains adapter socket on the rear of the device. € Insert the mains adapter into a suitable socket. € The time is shown on the device display. € Route the cable antenna of the device to the rear. 1 "Beurer LightUp" app Once you have downloaded the "Beurer LightUp" app and the wake-up light is connected to a smartphone via Bluetooth®, you can control all of the functions of the wake-up light with ease via the smartphone app. For your convenience, instead of using the buttons on the device, we recommend that you control the functions of the wake-up light via the smartphone app. 3 Sunset function The wake-up light can also be used to simulate a sunset, whereby the light slowly turns darker after a set period of time. The sunset function can only be adjusted via the menu in the "Beurer LightUp" app. to select an alarm memory space , proceed as follows: 1. Select the desired alarm memory space by pressing the ALARM button. This appears in the display (several alarm memory spaces may be selected at the same time). To deactivate an alarm, keep pressing the ALARM button until the corresponding alarm clock symbol disappears from the display. Device operation The following basic functions can also be controlled directly without the app using the buttons on the device, however this is only possible if the app is closed on your smartphone. The wake-up light can only be used with its full functionality together with the "Beurer LightUp" app. 3 Setting the alarm time Setting the alarm time on the wake-up light To set an alarm time for the selected alarm memory space, proceed as follows: 1. For an already activated alarm, press and hold the ALARM button for two seconds. Set the alarm hour using the SET buttons p  Confirm with the / q. The alarm minute flashes in the display. Set the alarm minute using the SET buttons p  Confirm with the / q. Set the desired alarm tone using the SET buttons p  (wake-up / q melody 1-10 , beep or radio  ). [. . . ] The white light of the reading lamp will come on. Switching off the alarm when the alarm tone sounds When the alarm sounds, press any button apart from Snooze. The alarm is now switched off and will only sound again at the set alarm time. The light stays on for a further 2 minutes to allow you to get up, before then switching off automatically. [. . . ]