User manual BIFINETT KH 109 ELECTRIC CAN OPENER WITH INTEGRATED KNIFE SHARPENER

[. . . ] The magnetic lid holder means you can remove the can lid safely. Features Handle Keyhole for the handle Magnetic lid holder Knife sharpener Keyhole for knife sharpener Cap Knife sharpener-storage Cable-storage Technical data Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : 230 V / 50 Hz Power consumption . . . . . . . . . . . . . . . . . . : 120 W Important safeguards When using electrical appliances, basic safety precautions should always be followed, including the following: Read all instructions carefully. To prevent electrical shock, do not put the can opener in water or other liquid. Close supervision is necessary when any appliance is used by or near children. [. . . ] Do not use the device for other than intended use. Instructions for use The can-opener: The can-opener is equipped with an auto-stop function, which stops the can-opener automatically once the can has been opened completely. The can remains fixed in the can-opener, while the separated can lid is held by the magnet. In order to use this function, it is important that you do not press the handle down during the opening process. If the handle is pressed down, the auto-stop function will be deactivated - this function should only be used if you do not want to open the can completely. To assemble the can-opener, please proceed as follows: Press the handle firmly into the opening provided in the upper part of the can-opener. The handle must be able to be moved downward freely. If this is not the case, press the handle more firmly into the opening. How to use the can-opener: 1. Raise the handle slightly and place the can with the upper rim between the retaining cog and the cutter wheel, so that the cutter wheel rests on the inner side of the rim of the can. Now place the movable magnet on the lid. The lid will be held by the magnet once it has been removed, and can be safely disposed of later. Press down on the handle until the cutter wheel penetrates the can lid. The can-opener will now automatically start to open the can. · In order to use the auto-stop function, release the handle as soon as the opening process starts. The can-opener will stop automatically as soon as the lid has been completely removed. If the auto-stop function does not work, for example in the case of heavy cans, raise the handle slightly to stop the can-opener. [. . . ] Insert the knife into the slot of the sharpening guide, holding it flat against the wall of the housing. Lower the blade until it touches the wheel. Repeat the same operation using the other slot to sharpen the other side of the blade. [. . . ]