User manual BIFINETT KH 450 JUICE EXTRACTOR

[. . . ] Be careful to keep these advice notes and if necessary pass them on to a third party. Technical information Mains voltage: Nominal power: KB time: 230 V ~ 50Hz 450 W 30 Minutes -4- KH 450 To avoid danger to life from electric shock: · The mains voltage at the mains socket must match that shown on the rating plate on the device. · If the connection lead or device does not work perfectly or is damaged, have it examined and repaired immediately at the service centre. · Arrange for defective power plugs and/or cables to be replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury. · Do not place the device out in the rain. [. . . ] Warning: Check that the device is switched off and the mains plug is out of the socket before assembling the device. Place the opening of the fruit flesh tray on the driveshaft . Position the tray such that it sits firmly in the recess on the base unit. Place the filter/sieve on the driveshaft . Make sure this is seated firmly before you continue assembly. Place the top cover on to the fruit flesh tray , so that the bottom of the feed chute sits inside the filter/ sieve . Make sure the top cover sits firmly in the fruit flesh tray recess. Lift the interlock levers and press them into the notches in the top cover. Press the bottom part of the interlock levers against the sides of the device until they engage. -6- KH 450 6. Hang the swivelling fruit juice container ­ first in the upper hinge then in the lower one as it has enough play to engage with light pressure. Place the container so that there, for example, fruit flesh can be captured. Close the fruit juice container and ensure that it snaps in. Place the separate fruit juice container or a glass under the fruit juice outlet. The fruit juice container has a froth catcher to provide clear and froth-free fruit juice. Insert the plug into the mains socket. Extracting juice 1. Hold the feeding rod with one hand and insert the fruit or vegetable pieces into the filler opening with the other. Always use the feeding rod to press the fruit/vegetables carefully into the opening (refer to Figs. Insert further pieces as the fruit or vegetables are processed. Do not switch off the device whilst this is being done. Tip: The lid is designed so that it can also be used as a convenient storage tray. Turn the lid the other way up on the filler opening assembly (refer to Fig. Warning: Never insert your finger or other objects into the feed opening whilst the device is operating. [. . . ] When processing fruit or vegetables that have a high liquid content (e. g. tomatoes, grapes, melons): Do not process more than 3 kg of fruit or vegetables before emptying the fruit flesh container. When processing fruit or vegetables with low liquid content (e. g. carrots, apples): empty the fruit flesh container as soon as it appears full. [. . . ]