User manual BIFINETT KH 601 ELECTRIC TEA MAKER

[. . . ] Ensure that the base with the electrical connections does not come into contact with water!Ensure that the base is completely dry before use, especially if it has accidentally become wet. Use the appliance only with the supplied base. Ensure that the power cable never becomes wet or damp during operation. [. . . ] Take the glass pot 3 from the base 5 and remove the brew system from the glass pot 3. Fill the glass pot 3 up to the MAX marking with water, then add a teaspoon of lemon juice (or lemon concentrate) to it. If lemon juice is not available, you could add a teabag (or a teaspoon of loose tea) directly into the water. Close the lid 1 and replace the glass pot 3 onto the base auf 5. To avoid scalds/burns and electric shocks, ensure that water does not overflow from the glass pot 3. Take hold of the brew system and pull the water riser pipe 0 with the sieve q upwards. Place the necessary amount of tea or number of teabags in the brew chamber 9. The brew chamber 9 must be positioned with the flattened side towards the handle 2. Insert the plug into a wall power socket and place the On/Off switch 7 at the position "I". the control lamp 4 and the On/Off switch 7 light up. The water is now boiled and forced upwards through the water riser pipe 0, to flow through the brew chamber 9 and then back into the glass pot 3. After the water has boiled, the appliance automatically switches itself into the keep-warm function. The control lamp 4 goes out, only the On/Off switch 7 continues to glow. As soon as the water cools, the Tea Maker warms the water back up. The control lamp 4 lights up again during this rewarming process. You can interrupt the brew process at any time: For this, place the On/Off switch 7 back into the position "0". If you remove the glass pot 3 from the base 5, the brew process is interrupted. the appliance could also be irreparably damaged!To obtain an optimal result with every brew process the appliance should be cleaned after every use. Regular use of the Tea Maker could perhaps cause it take on aromas from strongly aromatic teas and pass them to other tea sorts. Clean the glass pot 3 of the Tea Maker with a moist cloth. As the water is fed back through the brewing system during the rewarming, after the first brewing process you should remove the brew system from the glass pot 3. [. . . ] If this product has been subjected to improper or inappropriate handling, abuse, or modifications not carried out by one of our authorised sales and service outlets, the warranty will be considered void. Your statutory rights are not restricted in any way by this warranty. Do not dispose of the appliance in your normal domestic waste. This product is subject to the European directive 2002/96/EG. [. . . ]