User manual BIFINETT KH 670 ICE CUBE MACHINE

[. . . ] ⷠDo not insert objects of any kind into the appliance. ⷠDo not touch any moving or electrically charged parts in the interior of the appliance. Never leave the appliance unattended when it is in use. ⷠDo not permit children or infirm persons to use the appliance without supervision. [. . . ] First of all, clean the appliance as Replace the ice cube collector container into the appliance and close the lid . Select the desired ice cube size: Press repeatedly on the button ice cube size ¹ until the control lamp glows under the desired size. Should the ambient temperature exceed 16°C, selecting the small or medium size is to be recommended. Otherwise, the ice cubes could stick to each other. Important: Under no circumstances should you place your hands or fingers in the Ice Cube Machine during the freezing process!15 minutes the finished ice cubes automatically slide through the throw-out mechanism into the ice cube collector container . the Ice Cube Machine automatically interrupts the freezing process if the ice cube collector container is full or the water reservoir is empty: · The display , , Content level - Ice cube collector container" on the control panel glows: The ice cube collector container is full. There is too little water in the water reservoir . Wait for 3 minutes until the cooling agent in the compressor has settled. press the button ON/OFF µ. The ice cube machine switches itself off. Note: On hygienic grounds the water in the water reservoir should be changed every 24 hours. Note: Should the appliance become separated from the mains network during operation or the lamps on the control panel glow, please check to see if an ice cube is blocking the throw-out mechanism. Should this be the case, remove the plug from the wall socket and carefully move the throw-out mechanism to the rear! loosen and remove the blocking ice cube. In the ice cube collector container the ice cubes are kept cool for a short period. For long-term storage remove the processed ice cubes from the appliance and store them in, for example, the freezer compartment of a refrigerator. Switch the appliance off when you no longer require further ice cubes. If you are not using the appliance, absolutely remove the water in it - by means of the drainage valve : Remove the plug from the wall socket. Place the Ice Cube Machine in such a position that you can hold a sufficiently large container under the drainage valve . Close the drainage valve when no more water flows from the valve. Leave the lid open until the Ice Cube Machine is dry on the inside. [. . . ] The ice cube production process takes too long. The ice cubes are too big and stick to each other. The water temperature must lie between 7°C and 32°C. ⷠOperate the Ice Cube Machine with an ambient temperature of less than 32°C. [. . . ]