User manual BIKE NASHBAR NASHBAR PHOTON H.O. HELMET MOUNT LIGHTING SYSTEM

[. . . ] Photon High Output Helmet Mount Light System Owner's Manual Thank you for purchasing a Photon H. O. This light system is constructed of the highest quality materials, such as cold-forged aluminum housings, heavy duty cords with strong positive-click connections, and halogen bulbs with dichoric glass reflectors. [. . . ] Connect the battery cord to the light cord, and snap the cords firmly together. To operate: To turn the headlamp on and off, push the switch at the back of the headlamp housing. Fig. To ensure long battery life, it is recommended that you recharge the battery immediately after each use, and always store your battery fully charged. A full charge requires approximately 10 hours. battery charger contains a trickle charge feature which allows the battery to be left on recharge indefinitely without harm. Once the charger switches to trickle mode, it must be unplugged from the wall outlet before a new charge cycle can begin. Bulb Replacement - Read Carefully! Take care when replacing the bulb to avoid damaging the bulb connection. 7. Loosen the bolt which secures the headlamp to the base. Rotate the headlamp until aimed properly, and securely retighten the assembly bolt. The lightweight battery pack can be carried in the waist pouch supplied with your light, or simply stashed in a jersey pocket or hydration pack. !v WARNING Lens Cap Bulb Assembly Base Hex Head Bolt Avoid burns. Do not touch headlamp housing during or immediately after use. Maintain air flow over light during use. Bulb Retainer Clip Exploded View 1. Disconnect headlamp from battery pack 2. To remove the bulb, carefully unthread the lens cap. [. . . ] Make sure the lens cap thread is fully engaged with the housing. Do not plug the lamp into the battery until after this step is complete. [. . . ]