User manual BINATONE COMBO 2310

[. . . ] USER GUIDE Concept Combo 2310 CORDED AND DIGITAL CORDLESS TELEPHONE WITH ANSWERING MACHINE UK BTP Ver 4, Nov 07 Before operating this set, please read these instructions carefully. Note: This guide is for the corded part only. For instructions on how to use the cordless part see the "Combo 2310 Cordless Handset" user guide. Important note — emergency calls The CC2310 cordless handset is not designed for making emergency calls when the mains power fails. But, if there’s a power failure, you can use the base unit telephone to make an Emergency Call, by lifting up the corded handset instead of using the speakerphone. [. . . ] Press the UP button to show "TAM", and then the MENU/OK/MUTE button to select it. Press the UP button to show "TAM SETTINGS". Press the MENU/OK/MUTE button to show "TAM ON/OFF". Press the MENU/OK/MUTE button to show "ON" or "OFF". or Press the UP or DOWN button to choose "ON" or "OFF". Press the MENU/OK/MUTE button to select it. If "ON" is selected, the display will then show "OGM1" or "OGM2" or Press the UPor DOWN button to choose "OGM1" or "OGM2", depending on whether you want to set answer and record (OGM1) or answer only (OGM2). Press the MENU/OK/MUTE button to select it, and the display will return to "TAM ON/OFF". Press the PHONEBOOK/BACK button to return to the previous menus. Binatone Help Line : 0845 345 9677 26 To Record your Outgoing Message (OGM) OGM1 is set as the default announcement when you set up the CC2310 for the first time. If you want you can record your own personal announcement of up to 60 seconds for each OGM. By Hotkey (1) To record OGM1 The pre-set announcement for OGM1 is “Sorry we cannot answer your call now, please leave your message after the beep". If you want to record your own OGM 1 message, first ensure OGM1 is set as the outgoing message. Then press and hold REWIND/OGM, you will see “OGM 1” on the display and hear a voice prompt “PLEASE RECORD NEW ANNOUNCEMENT AFTER THE BEEP”. After a beep tone, the display will show “RECORD” and then you can start speaking. When you want to end the recording, press STOP/ON/OFF. Then the unit will playback the OGM 1 announcement automatically. (2) To Record OGM 2 The pre-set announcement for OGM2 is “Sorry I cannot answer your call now, please call later” . The unit will automatically switch to OGM 2 to answer a call when the memory is full. If you want to record your own OGM2 message, first ensure OGM2 is set as the outgoing message. Repeat above sequence as OGM 1 to record the OGM 2 announcement. 2. By MENU Alternatively, you can record OGM1 or OGM2 using the Base menu system. Press the MENU/OK/MUTE to show "PHONEBOOK". Press the UP button to show "TAM", and then the MENU/OK/MUTE button to select it. Binatone Help Line : 0845 345 9677 27 Press the UP button to show "TAM SETTINGS". Press the MENU/OK/MUTE button to show "TAM ON/OFF". [. . . ] If you still cannot identify the cause of the problem, contact the Binatone on 0845 345 9677 (UK only). Binatone Help Line : 0845 345 9677 41 Cleaning and care Do not clean any part of your CC2310 with benzene, thinners or other solvent chemicals – this may cause permanent damage which is not covered by the Guarantee. When necessary, clean it with a damp cloth. Keep your CC2310 away from hot, humid conditions or strong sunlight, and don’t let it get wet. Every effort has been made to ensure high standards of reliability for your CC2310. [. . . ]