User manual BIONAIRE BCH4267

[. . . ] Waste electrical products should not be disposed of with Household waste. Check on the following website for further recycling and WEEE information: www. bionaire. com or e-mail enquiriesEurope@jardencs. com. CERAMIC HEATER WITH COLOUR CHANGING GRILL BCH4267 Holmes Products (Europe) Ltd 1 Francis Grove London SW19 4DT England Fax: +44 (0)20 8947 8272 Email: enquiriesEurope@jardencs. com Website address: www. bionaire. com UK - Free phone Customer Service Helpline ­ 0800 052 3615 © 2007 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. 9100020008710 BCH4267IUK07EM1 INSTRUCTION MANUAL BCH4267IUK07EM1. qxd 10/9/07 22:25 Page 4 ENGLISH BCH4267 Fig. [. . . ] This may take up to an hour depending on the environment surrounding the heater and the cooling down time of the element. NOTE: If left in extreme cold temperatures (-22° F/-30°C) the Colour Changing Display may not perform. The heater itself will function normally. Store heater in a cool and dry location. NOTE: The colour changing effect may wear off after continuous, heavy use of the heater or in time. The heater will continue to operate normally. AUTO SAFETY SHUT-OFF This heater is equipped with a technologicallyadvanced, safety system that requires the user to reset the heater if there is a potential overheat situation. When a potential overheat temperature is reached, the system will automatically shut the heater off. It can only resume operation when the user resets the unit. Turn MODE to (O) and Thermostat to HI ( 2. Safety Back-Up Fuse In the unlikely case the heater does not respond to an overheat situation, the safety back-up fuse will engage. In this case, the heater will not reset. Please contact your local service number on the back of the manual for advice. PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS When using electrical appliances, basic safety precautions should always be taken including the following: 1. Before connecting the heater, check that the voltage indicated on the rating plate corresponds to the main voltage in your home/office. WARNING: In order to avoid overheating, do not cover the heater ( ). DO NOT position the heater directly under a power socket. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. If the supply cord or plug is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid hazard. The heater contains no user serviceable parts. Should the product suffer damage or breakdown, it must be returned to the manufacturer or their service agent. Under the environment with electrical fast transient, the product may malfunction and require user to reset the product. Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly. [. . . ] Installation of a plug Applicable to U. K. and Ireland This product is fitted with a 13A plug complying to BS1363. If this plug is unsuitable or needs to be replaced, please note the following: The wires in the mains lead are coloured as such: BROWN LIVE BLUE NEUTRAL Please note that the colour of these mains wires may not correspond with the colour markings that identify the terminals in your plug. Please proceed as follows: The BROWN coloured wire must be connected to the terminal, which is marked with the letter "L" or is coloured RED. [. . . ]