User manual BIONAIRE BCH9300-050

[. . . ] Indd 1-3 5/8/12 11:08 AM BCH9300 B A C B ENGLISH PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS When using electrical appliances, basic safety precautions should always be taken including the following: 1. Before connecting the heater, check that the voltage indicated on the rating plate corresponds to the main voltage in your home/office. WARNING: In order to avoid overheating, do not cover the heater ( ). DO NOT position the heater directly under a power socket. [. . . ] This cool down process ensures an accurate and consistent temperature reading. NOTE: To shut the heater off at any setting, press and hold the Power Button ( ) for 2 seconds. The heater will cool down for 15 seconds, and the Fan Only indicator light will blink in Green until cool down is completed. The heater will return to Standby mode with room temperature shown on the LCD Display. The digital thermostat has memory; it will remember the last temperature setting before the heater is turned off. However, if the heater is unplugged, the digital thermostat will no longer remember the previous temperature setting. You will need to reset the digital thermostat if the heater is unplugged. Oscillation Press the Oscillation Button ( ) on control panel or remote control to activate or stop the oscillation feature. NOTE: Please do not manually turn the heater on the base. This allows you to program your heater to shut off automatically after running a defined time interval (from 0 to 8 hours). Press the Timer Button ( ) once either on the control panel or remote control. Each press of the button will adjust from 0 to 8 to select your desired time interval for the heater to shut-off automatically. The selected hour will appear on the LCD Display, and then the ?Hr?icon will stop blinking in to indicate that the selected timer is activated. The LCD Display will return to show the preset temperature and mode setting. To cancel the Timer feature, press and hold the Timer Button ( ) for 2 seconds, the Timer indicator light will go off. NOTE: The timer does not work with the Frost Guard Setting. CLEANING AND MAINTENANCE Always unplug the heater before cleaning and allow the heater to cool down. Clean the unit with a soft cloth moistened with a mild soap and water solution. NEVER use abrasive or flammable solvents to clean the unit. After cleaning, be sure to completely dry the unit with a cloth or towel. It is recommended that you store the unit in its original carton. [. . . ] Dette giver dig mulighed for at programmere varmeapparatet til at slukke automatisk efter at have krt et bestemt tidsinterval (fra 0 til 8 timer). Holmes ptager sig inden for garantiperioden gratis at reparere eller udskifte apparatet og enhver del af apparatet, der er konstateret ikke at fungere korrekt, forudsat at: ? Du omgende underretter kbsstedet eller Holmes om problemet; og ? Apparatet ikke er ikke blevet ndret p nogen mde eller udsat for beskadigelse, forkert brug, misbrug, reparation eller ndring af en person, der ikke er autoriseret af Holmes. Supplerende varme - Brbare elektriske varmeapparater er beregnet at give supplerende opvarmning af rum, til at opvarme rummet du befinder dig i, og give dig mulighed for at skrue ned for termostaten til centralvarmen. Flg instruktionerne for sikkerhedsslukning for at stte driften i gang igen. [. . . ]