User manual BIONAIRE BFH004X-01

[. . . ] Your Bionaire® Heater has been designed using the latest in technology. With normal care and maintenance, your Bionaire® Heater will provide years of satisfactory performance. GENERAL DESCRIPTION Please see pictures on inside back page BFH400 (Fig. Bracket IMPORTANT SAFEGUARDS Mains connection • Read these instructions carefully, in conjunction with the illustrations, before using the heater. [. . . ] AccuTemp™ will now automatically maintain the heater temperature at the desired level. To shut the unit off at any time, press the "MODE" button for 2 seconds. If the heater will not switch on in AccuTemp™ mode, please check the room temperature is not higher than the preset thermostat temperature. It is normal for the heater to cycle On and Off as it maintains the selected room temperature. In Auto mode, when the heater automatically switches off, the High or Low indicator (depending on the setting) will flash. AccuTemp™ will memorise the settings if the heater is turned off using the "MODE" button (see 6 above). However, if the heater is unplugged, the AccuTemp settings will need to be reprogrammed as detailed from1 above. USING THE TIMER AccuTempTM Programmable Timer (For BFH410 only) Accutemp™ allows the user to programme the heater to come ON at a preset time OR switch OFF after a selected period. You require the heater to switch on at 5 pm therefore: Set the ON time at 4 hours. If the heater is on, press the mode button for 2 seconds to switch the heater off. While the heater is off, hold down both the (+) and (-) buttons together to select timer. The display will flash and a red dot will flash on the right hand side of the digital display. Using either the (+) or (-) buttons, programme the heater to switch on up to 16 hours later, in increments of 1 hour. After the preset length of time the heater will automatically turn on to “Auto-Hi-24˚C” for a period of 2 hours. The heater is running and you require the heater to switch off at 10 pm therefore: Set the time at 9 hours. Select the Mode and temperature you want the heater to run in (e. While the heater is running hold down both the (+) and (-) buttons together to select timer. The display will flah and red dot will flash on the right hand sode of the digital display. Using either the (+) or (-) buttons programme the heater to turn off up to 16 hours later in increments of 1 hour. After setting the time, the digital display will return to showing the current room temperature and will illuminate to show the timer is activated. After the predetermined length of time has passed, the heater will automatically switch off. When the timer is set, a red dot will flash continuously in the right hand side of the digital display. [. . . ] CLEANING • Turn the switch to the 0 (OFF) position. € Remove the plug from the wall socket. € Wait for the heater to cool down sufficiently. € You may clean the outside of the heater with a damp cloth. [. . . ]