User manual BIONAIRE BWM5251

[. . . ] Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. The insides of the unit contain no user serviceable parts. Only qualified personnel should perform all servicing. Should the unit stop working, first check the fuse in the plug (UK only) or fuse/circuit breaker at the distribution board is operating, before contacting the manufacturer or service agent. [. . . ] NEVER place it on a surface that may become damaged by exposure to water and moisture (i. e. DO NOT allow the Moisture Outlet to directly face the wall. Moisture could cause damage, particularly to wallpaper. Humidifier should be unplugged when not in use. NEVER tilt, move, or attempt to empty unit while it is operating. Shut off and unplug before removing the water tank and moving the unit. DO NOT attempt to remove the water tank within 15 minutes after the humidifier is turned off and unplugged. This humidifier requires regular maintenance to operate appropriately. Refer to cleaning and maintenance procedures. NEVER use detergents, petrol, glass cleaner, furniture polish, paint thinner, or other household solvents to clean any part of the humidifier. Excessive humidity in a room can cause water condensation on windows and some furniture. If this happens, turn the humidifier OFF. Do not use humidifier in an area where humidity level is in excess of 55%. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. PLEASE SAVE THESE INSTRUCTIONS Please note that this is an electrical appliance, and requires attention when in use. HOW YOUR WARM MIST HUMIDIFIER WORKS Your Bionaire® Warm Mist Humidifier is designed to allow the proper amount of water to flow out of the tank and into the heating chamber where the Electronic Thermal Control heating element warms the water. [. . . ] Some of the impurities from the water are collected in the Heating Chamber. The Electronic Thermal Control Heating element is lined with a coating that is designed to provide the easiest cleaning to prolong the operating efficiency of the humidifier. DO NOT use any metal or hard objects to clean the Heating Element. The coating can be scratched if cleaned improperly. [. . . ]