User manual BIOSTAR GF8100 M2 PLUS SETUP MANUAL

[. . . ] GF8100 M2+ SE Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. [. . . ] Drawbacks: Requires twice the available disk space for data redundancy, the same as RAID level 1. Fault Tolerance: Yes. - GeForce 8100 Block 1 Block 3 Block 5 Block 2 Block 4 Block 6 Block 1 Block 3 Block 5 Block 2 Block 4 Block 6 21 Motherboard Manual RAID 5: RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself. Features and Benefits Drives: Minimum 3. Uses: RAID 5 is recommended for transaction processing and general purpose service. Benefits: An ideal combination of good performance, good fault tolerance, and high capacity and storage efficiency. Drawbacks: Individual block data transfer rate same as a single disk. Fault Tolerance: Yes. Disk 1 DATA 1 DATA 3 PARITY DATA 7 DATA 9 PARITY Disk 2 GeForce 8100 DATA 2 PARITY DATA 5 DATA 8 PARITY DATA 11 Disk 3 PARITY DATA 4 DATA 6 PARITY DATA 10 DATA 12 For more detailed setup information, please refer to the Driver CD, or go to http://www. nvidia. com/object/IO_28159. html to download the NVIDIA RAID User's Guide. 22 GF8100 M2+ SE CHAPTER 5: USEFUL HELP 5. 1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn't show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP. EXE under your optical drive. A. Driver Installation To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program. B. Software Installation To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program. C. Manual Aside from the paperback manual, we also provide manual in the Driver CD. Click on the Manual icon to browse for available manual. Note: You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from http://www. adobe. com/products/acrobat/readstep2. html 23 Motherboard Manual 5. 2 SOFTWARE Installing Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled. Select Software Installation, and then click on the respective software title. [. . . ] ECC DIMMs werden nicht unterstützt. Super E/A Bietet die häufig verwendeten alten Super E/A-Funktionen. Arbeitsspeich Max. 8GB Arbeitsspeicher er Jeder DIMM unterstützt 256MB/512MB/ 1GB/2GB/4GB DDR2. Grafik Integrierter GeForce 8100-Chipsatz Max. 512MB gemeinsam benutzter Videospeicher Unterstützt DX10 / HDCP / PureVideo Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus Unterstützt PIO-Modus 0~4, Datentransferrate bis zu 3 Gb/s Konform mit der SATA-Spezifikation Version 2. 0. IDE Integrierter IDE-Controller SATA Integrierter Serial ATA-Controller LAN HD Realtek RTL 8201CL PHY 10 / 100 Mb/s Auto-Negotiation Halb-/ Vollduplex-Funktion 5. 1-Kanal-Audioausgabe Unterstützt High-Definition Audio x1 x2 Audio-Unters ALC662 tützung Steckplätze PCI Express Gen2 x16 Steckplatz PCI-Steckplatz 32 GF8100 M2+ SE Spezifikationen Diskettenlaufwerkanschluss IDE-Anschluss SATA-Anschluss Fronttafelanschluss Front-Audioanschluss CD-IN-Anschluss S/PDIF- Ausgangsanschluss Onboard-Ans CPU-Lüfter-Sockel chluss System-Lüfter-Sockel "CMOS löschen"-Sockel USB-Anschluss Stromanschluss (24-polig) Stromanschluss (4-polig) Druckeranschluss Anschluss Serieller Anschluss PS/2-Tastatur PS/2-Maus Rückseiten-E /A VGA-Anschluss LAN-Anschluss USB-Anschluss Audioanschluss DVI-Anschluss Platinengröß e 190 mm (B) X 244 mm (L) x1 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1 x4 x3 x1 Jeder Anschluss unterstützt 1 Druckeranschluss Jeder Anschluss unterstützt 2 Fronttafel-USB-Anschlüsse x1 x1 x6 x1 x1 x1 x1 x1 Jeder Anschluss unterstützt 2 Diskettenlaufwerke Jeder Anschluss unterstützt 2 IDE-Laufwerke Jeder Anschluss unterstützt 1 SATA-Laufwerk Unterstützt die Fronttafelfunktionen Unterstützt die Fronttafel-Audioanschlussfunktion Unterstützt die CD Audio-In-Funktion Unterstützt die digitale Audioausgabefunktion CPU-Lüfterstromversorgungsanschluss (mit Smart Fan-Funktion) System-Lüfter-Stromversorgungsanschluss Sonderfunkti Unterstützt RAID 0 / 1 / 5 / 0+1 onen OS-Unterstü tzung Unterstützt Hybrid SLI (by nVIDIA driver) Biostar behält sich das Recht vor ohne Ankündigung , Windows XP / VISTA die Unterstützung für ein Betriebssystem hinzuzufügen oder zu entfernen. 33 Motherboard Manual FRANCE SPEC Socket AM2+ UC Processeurs AMD Athlon 64 / Athlon 64 FX / Althlon 64 X2 / Sempron / Phenom Bus frontal Chipset Prend en charge Hyper Transport 3. 0 jusqu'à une bande passante de 5. 2 GT/s GeForce 8100 ITE 8718F Super E/S Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée. Interface à faible compte de broches Initiatives de contrôle environnementales, Moniteur de matériel Fonction "Gardien intelligent" de l'ITE Module de mémoire DDR2 à mode à double voie Prend en charge la DDR2 533 / 667 / 800 Prend en charge la DDR2 1066 (by AM2+ CPU) Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne sont pas prises en charge Mémoire vidéo partagée maximale de 512 Mo Prise en charge DX10 / HDCP / PureVideo Mode principale de Bus Ultra DMA 33 / 66 / 100 / 133 Prend en charge le mode PIO 0~4, Taux de transfert jusqu'à 3 Go/s. [. . . ]