User manual BIOSTAR NF520B A2G PLUS BIOS SETUP

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BIOSTAR NF520B A2G PLUS. We hope that this BIOSTAR NF520B A2G PLUS user guide will be useful to you.

Lastmanuals help download the user guide BIOSTAR NF520B A2G PLUS.

Download

You may also download the following manuals related to this product:

BIOSTAR NF520B A2G PLUS SETUP MANUAL (1466 ko)

Manual abstract: user guide BIOSTAR NF520B A2G PLUSBIOS SETUP

Detailed instructions for use are in the User's Guide.

 [. . . ] NF520B A2G+ BIOS Setup
Table of Contents
BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 Standard CMOS Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Advanced BIOS Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  [. . . ] Modes 0 to 4 will increase performance progressively. In Auto mode,  the system automatically determines the best mode for each device. The Choices: Auto (default),  Mode0,  Mode1,  Mode2,  Mode3,  Mode4. 

19

NF520B A2G+ BIOS Setup
Primary Master/Slave UDMA
Ultra DMA function can be implemented if it is supported by the IDE hard drives in your system. As well,  your operating environment requires a DMA driver (Windows 95 or OSR2may need a third party IDE bus master driver). If your hard drive and your system software both support Ultra DMA,  select Auto to enable BIOS support. The Choices: Auto (default),  Disabled. 

IDE DMA Transfer Access
This item allows you to enable or disable the IDE DMA transfer access. The Choices: Enabled (default),  Disabled. 

Serial-AT A Controller
Enables support for Serial-ATA controller. The Choices: All Enabled (default),  Disabled

IDE Prefetch Mode
The "onboard" IDE drive interfaces supports IDE prefetch function for faster drive access. If the interface on your drive does not support prefetching,  or if you install a primary and/or secondary add-in IDE interface,  set this option to "Disabled". The Choices: Enabled (default),  Disabled. 

20

NF520B A2G+ BIOS Setup
Onboard Device

USB Keyboard/ Storage Support
This item allows you to support the USB legacy devices. The Choices: Enabled,  Disabled (default). 

USB Mouse Support
This item allows you to enable or disable the USB Mouse Legacy Support. Enabled Enable USB Mouse Support. 

Disabled (default) Disable USB Mouse Support. 

HD Audio
This item allows you to enable or disable to support HD Audio. The Choices: Auto (default),  Disabled. 

21

NF520B A2G+ BIOS Setup
Onboard I/O Address

Onboard FDC Controller
Select enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you installed another FDC or the system uses no floppy drive,  select disabled in this field. The Choices: Enabled (default),  Disabled. 

Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second serial ports. The Choices: 3F8/IRQ4 (default),  Disabled,  2F8/IRQ3,  3E8/IRQ4,  2E8/IRQ3,  Auto. 

Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with which I/O Address. The Choices: 378/IRQ7 (default),  278/IRQ5,  3BC/IRQ7,  Disabled. 

22

NF520B A2G+ BIOS Setup
Parallel Port Mode
This item allows you to determine how the parallel port should function. The Choices: SPP (default) EPP ECP ECP+EPP Using Parallel port as Standard Printer Port. Using Parallel Port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. Using Parallel port as ECP & EPP mode. 

ECP Mode Use DMA
Select a DMA Channel for the port. The Choices: 3 (default),  1. 

Onboard PCIE LAN
This option allows you to control PCIE LAN.  [. . . ] The Choices: Min=0, . Max=127,  Key in a DEC number. Start PWM Value When CPU temperature arrives to the set value,  the CPU fan will work under Smart Fan Function mode. The range is from 0~127,  with an interval of 1. The Choices: Min=0, . Max=127,  Key in a DEC number.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BIOSTAR NF520B A2G PLUS

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BIOSTAR NF520B A2G PLUS will begin.