User manual BISSELL 6700-C

[. . . ] Hold plug when rewinding the cord onto the reel. Do not allow the plug to whip when rewinding. Do not use cleaner if it has been dropped, damaged, left outdoors or dropped into water. Return it to an Authorized Service Centre. [. . . ] Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User's Guide will greatly enhance your ability to get the most performance from your BISSELL® Butler Revolution for many years. How to put it together Assembling the Vacuum Cleaner for Use 2. Place one hand on the black plastic grip. Place the other hand on the expanded end. Slide the narrow end of the Extension Wand into the Floor Nozzle Tube. Slide the narrow end of the Dust Cup bracket into the expanded end of the Extension Wand. Slide the handle end of the Hose into the large end of the Dust Cup bracket. 2. 5. Narrow End Expanded End Dust Cup Bracket 3. Slide the Hose Clamp into the suction inlet of the unit. 4. 5. 4 Index Safety instructions . . 5 Special tools Rug/Floor Selector Before use, make sure that the position of the select button is in the right position for the type of surface to be cleaned. Push the side 1 when cleaning the carpets. Push the side 2 when cleaning the floor, tile, mat, etc. Using special tools . . 10 1 2 Dusting Brush To use the Dusting Brush, remove the handle end of the Hose from the top of the Dust Cup Bracket. b. c. 5 Operating/Maintenance Instructions for your BISSELL Compact Canister Vacuum Cleaner Storage Your cleaner is designed to stand firmly upright for cleaning and storage. Use in this manner and it takes up a minimum of space, and allows you to work in the narrowest spaces. WARNING: Tool Storage Your cleaner features a tool storage space. It can be used to store the cleaning tool while it is not in use. Cord Storage Hold plug when rewinding the cord onto the reel. Do not allow the cord to whip when rewinding. To extend the Power Cord for use, grasp the plug and gently pull out from the vacuum cleaner. When removing the Power Cord from the electrical outlet, switch off the power and grasp the plug. Your cleaner is equipped with an automatic rewind button. When cleaning is finished, switch off power and disconnect the plug from the electrical outlet, then press on the Cord Rewind Button with your hand. [. . . ] This warranty does not cover parts of the unit that require replacement under normal use. For your protection, you should always insure the unit and/or part when shipping or mailing. BISSELL will reimburse you for the parcel post, CanPar or UPS charge. Any charges for packaging or insurance are your responsibility. [. . . ]