User manual BISSELL OXYPRO 240V

[. . . ] OxyProTM USER'S GUIDE 7920 SERIES 220 - 240V 3 Safety Instructions 4 Product View/Accessories 5 Assembly 6-17 Features / Operations 18-20 Routine Maintenance 21 Troubleshooting 22 Consumer Services 23 Replacement Parts 24 Warranty ug310-5829_7920K_405. indd 1 5/5/06 11:25:01 AM Thanks for buying a BISSELL OxyProTM We're glad you purchased a BISSELL OxyPro heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your OxyPro is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you'll receive fast, considerate assistance. [. . . ] OxyKIC has a revolutionary Dual Chamber System that activates the power of oxygen with a tough spot cleaner. The result is a powerful, oxygen activated spray that makes spot & stain removal easy ­ no scrubbing needed!Note: OxyKIC is not recommended for use on upholstery. Instantly begin to remove tough carpet spots and stains in between deep cleaning by following these simple steps: Remove excess liquid or solid particles from spot or stain before applying OxyKIC. 1. 2. 7. Before cleaning, test a small, hidden area for colourfastness and examine when dry. Shake and bend tab under to release trigger. Fully press and spray in a circular pattern (avoid tilting can more than 60° while spraying). Let OxyKIC settle into the spot or stain for 3 ­ 5 minutes. Blot spot or stain with a clean dry cloth. For tough set-in spots & stains, repeat steps 3 ­ 5. Be sure to let the area cleaned with OxyKIC dry completely before deep cleaning. 13 ug310-5829_7920K_405. indd 13 5/5/06 11:25:22 AM Perfect PassTM The Perfect Pass feature is designed to help you achieve the best cleaning results when deep cleaning. Apply smooth even strokes when deep cleaning your carpets. An upright deep cleaner should not be used at the same speed as an ordinary vacuum. That is too fast for optimum cleaning results. The Perfect Pass indicator displays a red light which tells you if you are in the range of Best Cleaning or if you are going Too Fast. If you notice consistently that the indicator light is in the Too Fast area, slow down until the light is in the Best Cleaning range. This will ensure you are getting the best cleaning results. TurboBrushTM Assembly and Use Unplug cleaner from the outlet before attaching TurboBrush. Attach TurboBrush to the Flex Hose by pressing tool onto the grip/trigger until button snaps into hole. Make certain tool is securely in place. 1. 4. Move the TurboBrush switch to the "BRUSH" position. This activates the brush when the unit is running. Place the tool directly on the soiled surface. Apply downward pressure on the tool and pull towards you while pulling trigger to spray cleaning solution. [. . . ] Poor tool position (Hand held attachments only). Tank-in-Tank has picked up maximum dirty water. 3 4 5 6 5 6 21 ug310-5829_7920K_405. indd 21 5/5/06 11:25:26 AM BISSELL Consumer Services If your BISSELL product should require service: In the UK and Australia, call BISSELL Consumer Services at the number below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other countries contact your local in country distributor for questions, service, or repair. If you have questions about your warranty or need replacement parts please contact the numbers below. [. . . ]