User manual BLACK & DECKER MOUSE 120W

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLACK & DECKER MOUSE 120W. We hope that this BLACK & DECKER MOUSE 120W user guide will be useful to you.

Lastmanuals help download the user guide BLACK & DECKER MOUSE 120W.


BLACK & DECKER MOUSE 120W : Download the complete user guide (4841 Ko)

Manual abstract: user guide BLACK & DECKER MOUSE 120W

Detailed instructions for use are in the User's Guide.

[. . . ] General Power Tool f) If operating a power tool in a damp Safety Rules location is unavoidable, use a WARNING: Read all safety warnings ground fault circuit interrupter and all instructions. Use of a warnings and instructions may result in electric GFCI reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are Save all warnings and doing and use common sense when instructions for future operating a power tool. Do not use reference a power tool while you are tired The term “power tool” in the warnings refers or under the influence of drugs, to your mains-operated (corded) power tool alcohol or medication. [. . . ] See Sanding: Lead Based Paint for additional information before sanding paint. Extension Cords Specific Safety Rules • Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. 3)  3 When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. Minimum Gauge for Cord Sets Volts Total Length of Cord in Feet 120V 0-25 26-50 51-100 101-150 (0-7, 6m) (7, 6-15, 2m) (15, 2-30, 4m) (30, 4-45, 7m) 240V 0-50 51-100 101-200 201-300 (0-15, 2m) (15, 2-30, 4m) (30, 4-60, 9m) (60, 9-91, 4m) Ampere Rating More Not more American Wire Gage Than Than 0 - 6 18 16 16 14 6 - 10 18 16 14 12 10 - 12 16 16 14 12 12 - 16 14 12 Not Recommended Symbols The label on your tool may include the following symbols. On/off switch Back handle Front handle Dust collection canister Sanding pad Removable pad tip Finger attachment Cord caddy 3 2 1 4 6 5 8 7 Lead Based Paint Sanding of lead based paint is NOT RECOMMENDED due to the difficulty of controlling the contaminated dust. The greatest danger of lead poisoning is to children and pregnant women. Since it is difficult to identify whether or not a paint contains lead without a chemical analysis, we recommend the following precautions when sanding any paint: Personal Safety • No children or pregnant women should enter the work area where the paint sanding is being done until all clean up is completed. €¢ A dust mask or respirator should be worn by all persons entering the work area. The filter should be replaced daily or whenever the wearer has difficulty breathing. €¢ NOTE: Only those dust masks suitable for working with lead paint dust and fumes should be used. €¢ NO EATING, DRINKING or SMOKING should be done in the work area to prevent ingesting contaminated paint particles. Articles of food, drink, or smoking should not be left in the work area where dust would settle on them. 4 Other Important Safety Warnings and Instructions Sanding Environmental Safety • Paint should be removed in such a manner as to minimize the amount of dust generated. €¢ Areas where paint removal is occurring should be sealed with plastic sheeting of 4 mils thickness. €¢ Sanding should be done in a manner to reduce tracking of paint dust outside the work area. Cleaning and Disposal • All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the duration of the sanding project. €¢ Plastic drop cloths should be gathered up and disposed of along with any dust chips or other removal debris. They should be placed in sealed refuse receptacles and disposed of through regular trash pick-up procedures. During clean up, children and pregnant women should be kept away from the immediate work area. [. . . ] Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges. The second option is to take or send the product (prepaid) to a Black+Decker owned or authorized Service Center for repair or replacement at our option. This warranty gives you specific legal rights and you may have other rights which vary from state to state or province to province. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BLACK & DECKER MOUSE 120W

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BLACK & DECKER MOUSE 120W will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag