User manual BLAUPUNKT BERMUDA MP35

[. . . ] Radio / CD / MP3 Bermuda MP35 Operating instructions 7 645 185 510 http://www. blaupunkt. com Open here 2 1 2 3 13 4 12 5 11 6 10 9 8 7 3 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH CONTROLS 1 2 3 4 5 6 Button to switch the unit on/off and to mute the unit. AUDIO button, to adjust the bass, treble, balance and fader settings and Sound Preset Short press: MENU button, to open the basic settings menu. Long press: SCAN, to start scan function. Arrow buttons X-Bass button to adjust the XBass function. [. . . ] Setting the scantime Press the MENU button 7. Press the or button 8 repeatedly until "SCAN TIME" appears in the display. Set the required scantime using the or buttons 8. When you have finished making your changes, press the MENU button 7 twice. Note: The set scantime also applies to scanning in CD/MP3 and CD changer mode. Listening to preset stations Select the memory bank in which the station was stored. Press the preset station button 1 - 6 ; of the station you want to listen to. Scanning receivable stations (SCAN) You can briefly play all the receivable stations by activating the scan function. You can set the scanning time to between 5 and 30 seconds in the menu. Setting the display You can choose to continuous display one of the followings: Band and Time Band and Frequency Keep the DIS button : pressed until the required display appears. 12 CD MODE You can use this unit to play standard CDs, CD-Rs and CD-RWs with a diameter of either 5 or 3 inches. Beside playing CDs containing audio data, CDs containing MP3 files can also be played on this device. Descriptions of the "MP3 mode" can be found after this chapter. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Problems might be experienced when trying to play copy-protected CDs. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!Contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no liability for any damage to the CD drive or CD that may occur as a result of the use of unsuitable CDs. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS CD mode Note: The unit will remain off if the ignition is off. To turn it on and play the inserted CD, press button 1 once. If a CD is already inserted in the drive and the unit is playing Radio, CD Changer or AUX mode. Press the SRC button = repeatedly until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Selecting tracks Press one of the arrow buttons 8 to select the next or previous track. If you press the or button 8 once, the current track will be played again from the beginning. Fast searching (audible) To fast search backwards or forwards, buttons 8 keep one of the pressed until fast reversing / fast forwarding begins. Switching to CD mode If there is no CD inserted in the drive and the unit is playing Radio, CD Changer or AUX mode, gently insert CD with the printed side uppermost into the drive until you feel some resistance. The CD is drawn into the drive automatically. You must not hinder or assist the drive as it draws in the CD. CD playback begins. Random play (MIX) Press button 5 MIX ;. [. . . ] Press the X-BASS 9 button once you have completed the setting. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Equalizer and X-BASS Press the button 8 repeatedly until one of the sound effect options appears on the display. Press the or button 8 to choose between the presets. If you want to deactivate the sound preset, choose "EQ OFF" from the available options. Press the AUDIO 6 button once you have completed the setting. [. . . ]