User manual BLAUPUNKT BOLOGNA RCR126

[. . . ] ) are obtained via central parts dispatch: (VKD3), Ulmer Straße, 30880 Laatzen 1. Instructions for installation and connection Disconnect the battery ground wire during installation and connection. [. . . ] In order to take advantage of the full car radio output and to avoid incorrect electrical connections with ISO plugs in the vehicle, it is advisable not to use the vehicle-specific positive/negative connection for this car radio. Note: By means of the support included in the delivery you can mount the set in cars with a DIN car radio cut-outout of 182 x 53 mm, an installation depth of 165 mm and an instrument panel thickness around the fixing clips of 1 - 20 mm, see fig. For cars with other cut-out dimensions Blaupunkt delivers car-specific installation kits for common car types for 50 mm sets. Please check the dimensions and, if necessary, use a car-specific installation kit, e. If the plus cable is connected to pin 15 of the fuse holder (plus connected via ignition lock) downstream of the fuse, the in-car radio can be switched on and off with the ignition key. In addition, the set automatically switches off after one our in order to avoid that the battery goes flat. The hour logic will not be activated whrn connecting the permanent +12 V line (terminal 30). 5 mm2) to the battery (do not route the cable near the cable harnesses). Connect the fuse holder to protect the positive cable and connect it to the positive pole of the battery (if necessary, drill a hole into the fire wall and use cable ducts). Install the car radio into the DIN cut-out provided in your car's dashboard ex factory. [. . . ] Stick in byglar till vänster och till höger i de befintliga hålen i panelen och tryck in så långt, att ett tydligt knäpp hörs (sidofjädrarna går ur ingrepp). En pluskabel (röd) med grov area (2, 5 mm2) dras direkt till batteriet. [. . . ]