User manual BLAUPUNKT BREMEN CD72

[. . . ] Radio / CD Bremen CD72 Operating instructions http://www. blaupunkt. com Open here 2 1 2 12 3 11 13 4 10 9 8 5 6 7 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH DANSK PORTUGUÊS ESPAÑOL CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 6 7 8 Button, to switch the unit on/off, volume control button, to unlock the removable control panel (release panel) NEXT button, to display the next pages of a menu, to switch memory banks in radio mode Softkeys, the function of the softkeys depends on the display content DSA button, to open the equalizer menu button, to open the retractable and detachable control panel (flip-release panel) Joystick MENU button, to open the basic settings menu. 9 : ; < = AUDIO button, to adjust the bass, treble, balance, fader and X-BASS (short press), to mute the unit's volume (long press). Display SOURCE button, to start CD playback / CDchanger playback or Compact Drive MP3 (only if connected) or to play another audio source (only if connected and activated) TUNER button, to switch to radio mode, to access the radio functions menu (only possible in radio mode) KeyCard slot into which the KeyCard can be inserted. 49 CONTENTS Notes and accessories . . . . . . . . . . 52 Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The radio functions menu appears in the display. Press the softkey 4 assigned to the "TUN2" display item. The second page of the radio functions menu is displayed. Press the softkey 4 assigned to the "DYNL" display item for dynamic radio mode. Press the softkey 4 assigned to the "DDA" or "PRE" display item for static radio mode. To return to the main radio menu, press the TUNER button < twice or the joystick OK 7. The settings are saved. 67 RADIO MODE Selecting the waveband / memory bank This unit can receive programmes broadcast over the FM frequency range as well as the MW, LW and SW (shortwave) ranges. There are four memory banks for the FM range and one for each of the MW, LW and SW ranges. In dynamic radio mode there are up to five memory banks at your disposal. Six stations can be stored in each memory bank. Selecting the waveband To select the FM, MW, LW or SW (shortwave) waveband, Selecting the FM memory bank To switch between the FM memory banks FM1, FM2, FM3 and FMT or between DL1 - DL5, press the NEXT button 3 repeatedly until the required memory bank appears in the display. The memory banks are accessed in the following order: FM1, FM2, FM3 and FMT. Tuning into a station There are various ways of tuning into a station in static radio mode. Automatic seek tuning press the TUNER button < in radio mode. The radio functions menu appears in the display. Move the joystick 7 down or up. The unit tunes into the next receivable station. Browsing through broadcasting networks (only FM) Most RDS stations provide several programmes. The information on these "broadcasting networks" is transmitted with the RDS signal. You can "browse" through these broadcasting networks and therefore switch programme simply and conveniently. Press the softkey 4 assigned to the "BAND" display item. Press the softkey 4 assigned to the "FM" display item for the FM waveband. Press the softkey 4 assigned to the "MW" display item for the MW waveband. Press the softkey 4 assigned to the "LW" display item for the LW waveband. Move the joystick 7 left or right. Press the softkey 4 assigned to the "SW" display item for the SW waveband. The main radio menu for the selected waveband appears. 68 RADIO MODE DEUTSCH Setting the sensitivity of station seek tuning You can choose whether the system should only tune into stations with a strong reception or whether it can also tune into those with a weak reception. Storing stations (only in static radio mode) Storing stations manually Select the required FM memory bank, i. e. FM1, FM2, FM3, FMT, or one of the MW, LW or SW wavebands. ENGLISH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS Press the TUNER button < in radio mode. The radio functions menu appears in the display. Tune into the required station as described in the section entitled "Tuning into a station". Press the NEXT button 3. Press the softkey 4 assigned to the "SENS" display item. Press one of the six softkeys for longer than two seconds to store the station on that softkey. Press the softkey 4 assigned to the "FM" display item (if you want to set the FM search sensitivity) or the "AM" display item (if you want to set the AM search sensitivity). The display shows the currently set value for the search sensitivity. "SENS 6" is the highest search sensitivity setting and means the tuner can receive distant stations. "SENS 1" is the lowest setting. Storing stations automatically (Travelstore - only in static radio mode) You can automatically store the six stations with the strongest reception in the region (only FM). [. . . ] The settings are saved. Switching the internal amplifier on/off If you use external amplifiers, you can switch off the unit's internal amplifier. Note: Please check this setting if the device does not play. Press the MENU button 8. Press the softkey 4 assigned to the "SETP" display item. Press the softkey 4 assigned to the "AMP" display item. If you want to change the current setting, press the softkey 4 assigned to the "YES" display item. 91 EXTERNAL AUDIO SOURCES External audio sources You can connect up to two external audio sources to the unit. [. . . ]