User manual BLAUPUNKT CANBERRA RCM 85

[. . . ] Radio / Cassette Canberra RCM 85 Operating instructions 1 2 3 4 5 6 7 20 8 9 10 19 11 18 17 16 15 12 13 14 3 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Short instructions . . . . . . . . . . . . . . . . . . . . . . . . 20 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Re-enter the correct code after the waiting time ("CODE" will appear in the display). If you switch off the set while it is blocked, the waiting time will start anew as soon as the radio is turned on again. 25 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH Radio operation with RDS (Radio Data System) The Radio Data System offers you more convenience when listening to FM radio stations. More and more radio stations have begun to broadcast RDS information alongside their programmes. As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the station buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS offers you further advantages: If "SEARCH" appears in the display when switching on the radio or recalling one of the stored frequencies, the unit is automatically searching for an alternative frequency. "SEARCH" will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely. If the reception quality of the selected programme becomes too bad: · Tune into another station. If you leave the service area of the regional programme tuned into, or if you would like to take advantage of the full RDS service, switch to "REG OFF". · Press the AF button for approximately 2 seconds until "REG OFF" appears. When active, "REG ON" will be briefly displayed each time the radio is switched on. Selecting a waveband With this car radio you can select between the following wavebands: FM 87. 5 - 108 MHz MW 531 - 1602 kHz LW 153 - 279 kHz · Select the desired waveband by pressing the FMT or M·L button. To switch between MW and LW: · Press M·L. Automatic tuning / · Press / ; the car radio will automatically search for the next station. When keeping the upper or lower part / of the rocker switch depressed, seek tuning will speed up in upwards or downwards direction. REG - regional programme Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern states of Germany Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you are listening to one programme and move to an area where another linked regional programme becomes stronger, the unit will switch to that programme. If you wish to continue listening to the first programme, · press the AF button for approximately 2 seconds. "REG ON" appears in the display. AF - Alternative frequency The AF (Alternative Frequency) function makes sure that the strongest frequency of the currently selected programme is always tuned in automatically. This function is activated when "AF" appears in the display. In order to switch this function on or off, · press the AF button briefly. While searching for the strongest reception signal, the radio may switch to mute briefly. 26 Automatic tuning Scrolling through the broadcasting network (only FM) You can use the << >> buttons to tune in stations of your reception area. [. . . ] REVIEW - fast reverse (audible): Press and hold down. Select disc (downwards) Select disc (upwards) Overview of the DSC factory settings LOCAL DIS TIME TA VOL BEEP LED (Code) LOUD RM : : : : : : : : 1 1 OFF 4 3 1 4 OFF CD = disc, T = TRACK (title). 0:24 = playback time of the current title SCAN Use this function to scan the CD tracks. To start the SCAN: · Press the SC/MIX button briefly. [. . . ]