User manual BLAUPUNKT CASABLANCA CD51

[. . . ] Radio / CD Casablanca CD51 Operating instructions 1 2 3 4 16 15 5 6 14 7 13 12 11 10 8 9 3 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH CONTROLS 1 2 3 4 5 Button - unlocks the removable control panel (release panel) Volume control Button - switches the unit on/off, volume mute RDS button - switches RDS feature on/off (Radio Data System), activate scrolling text in display. FM button (band) - selects FM radio mode and the FM memory levels TS - starts the Travelstore function Display button - displays the time. DIS - to change the display contents MENU button - opens the basic settings menu. 9 : ; < = button - opens the flap and removable control panel (flip-release panel) Arrow buttons OK button - confirms menu entries and starts the SCAN function DEQ button (digital equalizer) switches the equalizer on/off AUD button (audio) - adjusts bass, treble, balance and fader LD - switches loudness function on/off (aurally compensated volume) Keys 1 - 6 AM button - selects AM radio mode and the AM memory level CD·C button - source selection between CD, CD changer (if connected) and AUX 6 7 8 > ? [. . . ] After the process is completed, the station stored in FMT memory location 1 will be played. The display shows the currently set value for sensitivity. "SENS HI" means that the tuner is highly sensitive. "SENS LO" means it is set to the lowest sensitivity setting. If "SENS LO" is selected, "lo" lights up in the display. Set the required sensitivity using the and buttons :. When you have finished making your changes, press the MENU 8 or OK ; button. Listening to preset stations Select the memory or the frequency range. Press the preset station button 1 6 > of the station you want to listen to. Storing stations Storing stations manually Select the required memory, i. e. FM1, FM2, FMT or the AM frequency range. Scanning receivable stations (SCAN) You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu. Starting SCAN Tune into the required station. Press one of the station buttons 1 6 > for longer than two seconds to store the station to that button. Keep the OK button ; pressed for longer than two seconds. "SCAN" briefly appears in the display followed by a flashing display of the current station name or frequency. 12 RADIO MODE ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Stopping SCAN and continuing listening to a station Press the OK button ;. Scanning is stopped and the station that was tuned into last will then continue to be heard. "HICUT 0" means no reduction will be made. "HICUT 3" means a maximum automatic reduction of the treble level and interference level. Press the MENU 8 or OK button ;. Switching bandwidth during interference (SHARX) The SHARX function allows you to largely avoid interference caused by neighboring radio stations (FM only). Switch on the SHARX function if you experience a high radio station density. Switching SHARX on/off Setting the scantime Press the MENU button 8. Keep pressing the button : until "SCANTIME" appears in the display. Set the required scantime using the and buttons :. When you have finished making your changes, press the MENU 8 or OK button ; twice. Note: The set scantime also applies to scanning carried out in CD and CD-changer mode. Press the MENU button 8. Keep pressing the button : until "SHARX" appears in the display. Press the Optimizing radio reception Treble reduction feature during interference (HICUT) The HICUT function improves reception during poor radio reception (only FM). If interference occurs, the treble is automatically reduced thus reducing the interference level. Switching HICUT on/off or button : to switch SHARX on/off. "SHARX OFF" means no automatic bandwidth switching will be carried out. "SHARX ON" means that automatic bandwidth switching will be carried out. ;. Press the MENU 8 or OK button Displaying scrolling text Some radio stations use the RDS signal to transmit advertising or other information instead of their station name. These scrolling texts appear in the display. You can deactivate the feature for displaying scrolling texts. Press the MENU button 8. [. . . ] When you are not changing any settings, the spectrometer displays the car radio's output level. You can also set the type of spectrometer in the menu. Setting the spectrometer type Press the MENU button 8. "MENU" appears in the display. Keep pressing the button : until "EQ DISPLAY" appears in the display. or button : to select "SPECTRUM1, " "SPECTRUM2" or "EQ DISP OFF. " your changes, press the MENU 8 or OK ; button twice. Press the When you have finished making Help adjusting the equalizer Start by adjusting the treble and mid levels and finish by setting the bass levels. [. . . ]