User manual BLAUPUNKT COLORADO CM168

[. . . ] ThummerTM III Steering Wheel Remote Control (sold separately) Commande 5 distance ThummerTM III (optionnelle) Funcionamiento del control remoto ThummerTM III (optional) Funcionamento do Controle Remoto ThummerTM Ill (optional) 2 Display The display consists of three fields and varies according to the operating mode and function. Display field 1: Radio mode Memory banks and wavebands Brief indication of preset station (e. g. Pl) Cassette mode CAS - cassette inserted fvlTL - tape type Charmer mode (optional)* Current track Display field 2: Radio mode Radio frequency or station name Clock display Cassette mode TAPEUTAPE2 - side of tape playing Active functions (e. g. CPS) Clock display Chanaer mode (optionah* Current CD playing CD time (elapsed time), CD name, CD number and Brief indication of changes in function Clock display Serves as display and input field during DSC programming Miscellaneous Indicates new source (e. g. when changing from radio to cassette) and active functions (e. g. [. . . ] All of the tracks on the tape in the tape deck will be scanned briefly one after the other. Press SCA again to switch the SCAN function off. The track currently playing will continue to play. Reversing the tape Press dD to change the tape direction during cassette playback from TAPE1 to TAPE2 or vice versa: At the end of the tape, the unit will automatically switch to the opposite side. Repeat song tracks Fast winding Use the rocker switch to fast forward or rewind the tape during cassette operation: >> forward << rewind. "FORWARD" or "REWIND" will light up in the display. Press the button indicating the opposite directiondb, or A/v to stop the function. If you have activated "Radio Monitor ON", the unit will play the radio station last selected while the tape is winding. You can alter the Radio Monitor setting in DSC mode. During tape playback press 4IRPT. "RPT" will light up in display field 3; "REPEAT-T' will appear briefly in display field 2. While the tape is rewinding, "REWIND-T" will appear in the displav. The track playing will repeat until you press 4/RPT again. "RPT" Skipping cassette tracks will disappear from the disolav. CPS stands for Cassette Program Search If you have activated "Radio Monitor ON", and allows you to skip over songs on the the unit will play the radio station last setape. You can The tracks must, however, be separately alter the Radio Monitor setting in DSC by at least 3 seconds of blank tape. During tape playback press either A or V , mode. on the rocker switch to activate the CPS mode. "CPS FF" or "CPS FR" will appear in the display. Press the button A/V repeatedly to skip the corresponding number of tracks in either direction. Tape type selection If you are playing METAL or 00, cassettes, press MTL. "MTL" will then light up in display field 1. 14 CD changer operation DOLBY B NR (Noise reduction) Cassettes which have been recorded with the DOLBY B NR system exhibit considerably less tape noise and higher dynamics. To play properly cassettes recorded using this system, press 00 . 00 will light up in display field 3. _ This unit offers you the ability to conveniently control a Blaupunkt CDC-A08 or CDC-A071 changer (or CDC-A05 with a special adaptor) all sold separately Switching to the CD changer mode Make sure that at least one CD has been inserted into the magazine. Cassette eject Press P to eject the cassette. l If a CD changer is connected , the c?% , Press SRC to change the audio source: symbol will light up in the display field 3. l Press SRC repeatedly until the CD The changer is equipped with a magazine functions appear in the display. for 10 discs. Inserting a CD Insert one or several CDs into the magazine (printed surface facing up). [. . . ] With the detachable face off, place the receiver into the mounting bracket and push it in until the side springs snap into position on the left and right. To remove the receiver, see the maintenance section on the next page. Fig. 2 GB5 Installing the Receiver in a Japanese Car This receiver is designed for easy installation in most popular Japanese cars that have "ISO" (sidebracket) mounting system. If you have questions, ask your Blaupunkt dealer. [. . . ]