User manual BLAUPUNKT DRESDEN RCR 45

[. . . ] Radio / Cassette Dresden RCR 45 Operating instructions 1 2 3 4 5 6 7 19 18 17 16 15 14 8 9 10 11 12 13 3 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Contents Short instructions . . . . . . . . . . . . . . . . . . . . . . . . 17 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you have lost or damaged your KeyCard, you can buy a new one from your specialised dealer. When using two KeyCards, you can individually store the following functions: Bass, treble, balance and fader settings, assignments of preset buttons, Loudness, TA (traffic announcement volume), BEEP volume. In addition to this, the settings activated before switching the radio off, such as the waveband, station, TA priority, Loudness, AF, REG ON/OFF and seek tuning sensitivity, will also remained stored. This ensures that the basic settings you have programmed will automatically be activated as soon as you have inserted your KeyCard. Removing the KeyCard Never pull out the KeyCard directly. This releases the card and puts it in the proper position for being removed. · Now you can pull it out. Displaying the radio pass data You can use the KeyCard supplied with the unit to display the individual radio pass data such as the model name, the type number (7 6 . . . ) and the serial number: · Press and hold down preset buttons 1 and 6 while switching on the unit. NEDERLANDS "Defining" a second KeyCard/ Replacing a KeyCard ITALIANO FRANÇAIS After approximately 10 seconds, the display will show "TURN OFF". When inserting a card of a different kind (like for example a credit card), the display will show "WRONG KC" for approximately 2 seconds. Remove the wrong card and turn off the set. Do not make further adjustments until you have a correct KeyCard available. · Press the KeyCard in, which releases the card and puts it in the proper position for being removed. · Remove the first KeyCard and insert the new one while "CHANGE" is still being displayed. Now you can also use the new KeyCard for operating your unit. A maximum of two cards can be used per set. When trying to "define" a third one, the system will automatically delete the access authorisation of that KeyCard which was not used for the "learning" process. ENGLISH DEUTSCH KeyCard theft-protection system Radio operation with RDS (Radio Data System) Optical indication for extra security When the car is stationary, the KeyCard tongue can be switched to flash for extra antitheft security. For this, the following requirements must be fulfilled: Permanent 12 V supply and the + ignition lead must be connected correctly (as illustrated in the installations instructions). "LED 1" must be adjusted in the DSC mode. Please refer to chapter "DSC programming LED". The Radio Data System offers you more convenience when listening to FM radio stations. More and more radio stations have begun to broadcast RDS information alongside their programmes. The selected memory bank is indicated in the display. · Press FM or TS until the desired memory bank lights up in the display (press repeatedly if necessary). Automatic tuning / Press / ; the car radio will automatically search for the next station. When keeping the upper or lower part / of the rocker switch depressed, seek tuning will speed up in upwards or downwards direction. Automatic tuning · Scrolling through the broadcasting network (only FM) You can use the << >> buttons to tune in stations of your reception area. If several programmes of one broadcasting network can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e. g. [. . . ] LED 0 - No flashing. LOCAL 1 - high sensitivity LOCAL 3 - low sensitivity DIS (dx) To adjust the seek tuning sensitivity for distant reception. 3- low sensitivity 27 PORTUGUÊS ESPAÑOL SVENSKA You can adjust the LED B to flash for extra anti-theft protection. (lo) To adjust the seek tuning sensitivity for local reception. NEDERLANDS ITALIANO DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to these if desired. [. . . ]