User manual BLAUPUNKT HAWAII DJ 51

[. . . ] Radio / Cassette Bologna C51 Düsseldorf C51 Hawaii DJ51 Kansas DJ51 Maryland DJ51 Operating instructions Bitte aufklappen Open here Ouvrir s. v. p. Öppna Por favor, abrir Favor abrir 2 1 2 3 4 16 15 5 6 14 7 13 12 11 10 8 9 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS ESPAÑOL CONTROLS 2 3 4 9 : ; < = > ?@ DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 5 6 7 button - unlatches the flip/ release panel Volume control Button - switches the radio and mute function on/off RDS button - switches RDS convenience function on/off (radio data system). BND button (band), source selection for radio mode, selection of FM memory levels and the wavebands MW and LW (MW and LW are not available on the Düsseldorf C51 and Kansas DJ51 units) TS, starts the Travelstore function. [. . . ] The volume at which navigation output or telephone calls start is adjusted as follows: Press the MENU button 8. Press the or button : until "TEL/NAVI VOL" appears in the display. Set the desired volume with the buttons :. When the setting process is complete, press the MENU button 8 or OK ; twice. There are three preset memory levels for the FM range and one each for the MW and LW ranges (only FM1, FM2 and FMT for Düsseldorf C51 and Kansas DJ51 units). Six stations can be stored on each memory level. Note: REG has to be specially activated/ deactivated in the unit's menu. 34 RADIO MODE levels or wavebands, briefly press the BND/TS button 5. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH In order to switch between memory Setting the sensitivity of the station search mode You can choose whether you wish to preset only strong or also poor-reception stations. Tuning into a station There are various methods available for tuning into a station. Automatic station search mode Press the MENU button 8. Press the or button : repeatedly until "SENS" appears on the display. Press the or button :. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. Press the button :. Press either the or buttons :. The display shows the currently set value for sensitivity. "SENS HI6" denotes maximum sensitivity. If "SENS LO" is selected, "lo" appears on the display. Note: You can only tune into stations manually if the RDS function has first been deactivated. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". Use the buttons : to set the desired degree of sensitivity. When you have completed the settings, press the MENU button 8 or the OK buttons ;. Storing stations Storing stations manually Select the required FM memory level, FM1, FM2, FMT or either waveband MW or LW (MW and LW are not available on the Düsseldorf C51 and Kansas DJ51 units). Tune into the desired station. Press the or button : to move to the next station on the broadcasting network. Note: If you want to use this feature, the RDS function must first be activated. You will then only be able to switch to stations that you have received once already. To do so, use the Scan or Travelstore function. Hold down one of the preset station buttons 1 - 6 > on which you wish to store the station for more than two seconds. 35 RADIO MODE Storing stations automatically (Travelstore) You can store the six stations with the strongest reception in the region automatically (only FM). The stations are stored in the FMT memory. Note: Stations that were previously stored in this memory are deleted in the process. Ending SCAN, continuing to listen to a station Press the OK button ;. The scanning process is completed, the station last scanned remains active. Setting the scanning time Press the MENU button 8. Press the or button : repeatedly until "SCANTIME" appears on the display. buttons : to set the desired scanning time. pleted, press the MENU button 8 or OK ; twice. Note: The set scanning time also applies to scanning in the CD and CD changer mode. Hold down the BND / TS button 5 for more than two seconds. [. . . ] "BASS" appears on the display. Adjusting the treble Press the AUDIO = button. "BASS" appears on the display. Press the Press the button : repeatedly until "TREBLE" appears on the display. or button : to set the treble. button : repeatedly until "FADER" appears on the display. or button : to set the volume distribution front/rear. Press the Press the Press the AUDIO = button once you have completed the setting. Press the AUDIO = button once you have completed the setting. 46 X-BASS X-BASS X-Bass means increased bass at low volumes. Note: X-BASS can be adjusted separately for each audio source (radio, Cassette, CD-changer and AUX). [. . . ]