User manual BLAUPUNKT IF BLUETOOTH/ USB C'N'C

[. . . ] The C`n`C interface allows you an even more convenient control of devices and data carriers that are connected to the car sound system via this C`n`C-ready interface. After connecting this interface to a C`n`Cready Blaupunkt car sound system, you can control the functions and settings via the car sound system. For some functions, you also have access to the PTT button of this interface. [. . . ] U Press the memory button with the desired number. To transfer audio files to the car sound system via Bluetooth, you must activate this function in your Bluetooth device. To do so, the Bluetooth device must be connected with the interface and support this function (for further details, please read the instructions of your Bluetooth device). To select Bluetooth audio streaming as audio source, u press the SRC button on the car sound system repeatedly until "BT-STREAM" (or the name of the connected device) appears on the display. Note: You can control the playback of tracks via Bluetooth audio streaming from the car sound system if your Bluetooth device supports it. The functions track selection, playback interruption (pause) and fast searching forward and reverse are available to control the audio streaming. Please read the instructions of your Blaupunkt To call the number dialed last, u press the DIS button on the car sound system for longer than 2 seconds. You can store and call up phone numbers using the memory buttons of the car sound system. Storing numbers To store a number, u enter the number as described in the chapter "Outgoing call". After entering the complete number, u press the desired memory button for longer than 2 seconds. You can connect a USB data carrier with MP3 files with the interface to play back the MP3 files via the car sound system. The car sound system must be switched on. Note Always switch off the device before connecting or disconnecting the USB data carrier so that the data carrier is correctly registered and unregistered. u Connect the USB device with the USB cable of the interface. U press the SRC button on the car sound system repeatedly until "USB" (or the name of the connected device) appears on the display. notes: · If your car sound system features a separate USB connection, an audio source connected to it may also appear as "USB" on the display. For further details, please read the chapter about MP3 mode in the instructions of your Blaupunkt car sound system. Please note that car sound systems with MP3 browse mode require information about the directories of the data carrier and the files stored in them. [. . . ] 21) Modifications not expressly approved by this company could void the user's authority to operate the equipment This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. rF Radiation Exposure This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. [. . . ]