User manual BLAUPUNKT IVHS-01 LF

[. . . ] 40 DIN front fitting (Method A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 DIN rear fitting (Method B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Flashing LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 On-screen display function . . . . . . . . . . . . [. . . ] Bolt 1 6 DIN front fitting (Method A) Fitting the equipment 2 1 2 18 3 2 5 7 4 93 3 Fig. Instrument panel Nut (5 mm) Lock washer Bolt (5 x 25 mm) Bolt Fixing angle Use the fixing angle piece to fix the rear of the equipment at the correct location. The angle piece can be bent to the desired form by hand. Washer 41 FITTING Removing the equipment 1 DIN rear fitting (Method B) Assembly using the threaded holes in the side of the equipment. 2 1 3 2 4 5 3 1. Reach with your fingers into the slot at the front of the frame, and pull the frame off. (To replace the frame, put the side that has the slot downwards, and insert it. ) 3. Lever Push the levers supplied with the equipment as shown in the diagram into the slots at both sides of the equipment until they latch. The equipment can be removed from the instrument panel by pulling the levers. 2 5 Fixing the equipment to the standard radio mounting clip. Locate the main unit in such a way that the screw holes in the clip and threaded holes in the main unit are aligned with one another, and fix the screws at two places on each side. Use either mushroom-headed screws (5 x 6 mm) or countersunk screws (4 x 6 mm), according to the shape of the screw holes in the clip. 42 FITTING 2. Hook (remove this part) REMOVABLE FRONT COVER DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH The front cover is removed as follows: 1. Each time these buttons are pressed, the speed with which the player is moving forwards or backwards will alter, depending on the type of disc, as follows: DVD Normal Replay Pause (still picture) Press the button during play. Press the button again to return to normal play. Repeat Press the REPEAT button to select the repeat mode, as shown here: REPEAT 1 REPEAT REPEAT OFF 2x 4x 6x 8x DVD/CD VCD & CD Normal Replay 1x 1. In the REPEAT 1 mode, the current section/chapter is continuously repeated. If you have selected the REPEAT mode, the player will repeat all the sections / chapters on the disc. When replay of the last section / chapter of the current disc has completed, the elapsed time is no longer displayed. (If the equipment is in the REPEAT OFF mode, then the VFD display will no longer show REPEAT & REPEAT. ) 2x 3x 4x Skipping a section Press the SKIP buttons, / , during play. button takes you to the next The button returns to section, while the the previous section. 49 MAIN FUNCTIONS VCD 1. The REPEAT function is not active for VCD 2. 0 (with PBC). Remote control sensor (IR) Point the remote control at the IR sensor for receiving the remote control signals. ILL (illumination) Press the ILL button to adjust the illumination of the VFD display in the following sequence. Brightness levels 4321 Selecting a higher level will increase the brightness of the VFD display. Flashing LED The LED display will flash if the front cover is not inserted into the main unit. Switching the player off Switch the equipment off using the ON button on the front of the cover, or press the corresponding key on the remote control unit. The RESET button The RESET button is located on the housing, and must be activated with the aid of a ballpoint pen or a thin metal object. It will be necessary to activate the reset button in the following cases: - The first time the unit is used after connecting the cable. - An error symbol is shown on the display. Open Press the OPEN button, so that the front cover opens. 50 MAIN FUNCTIONS Press the DISPLAY button during play in order to show the contents of the inserted disc on the screen. [. . . ] NORMAL/PS (for TV format 4:3) Replay in PAN & SCAN format. (The side edges are cropped when used with a widescreen TV. ) NORMAL/LB (for TV format 4:3) Replay in letterbox format. (When used with a wide screen television, the upper and lower edges of the screen will be black. ) WIDE (for TV format 04:09:00 PM) Choose this option if a TV with a widescreen format is connected. TV DISPLAY TV TYPE PIC MODE ANGLE MARK OSD LANG SPDIF CAPTIONS NORMAL / PS NORMAL / LB WIDE MAIN PAGE Video Material Normal 4:3 TV Screen 4:3 Pan Scan Letter-box Wide(16:9) 16:9 56 GENERAL SETUP DEUTSCH General setup TV DISPLAY TV TYPE PIC MODE ANGLE MARK OSD LANG SPDIF CAPTIONS PAL (USA:NTSC) NTSC PAL TV DISPLAY ENGLISH TV TYPE PIC MODE ANGLE MARK OSD LANG SPDIF CAPTIONS AUTO HI-RES N-FLICKER MAIN PAGE MAIN PAGE Setting the TV TYPE You can use this player to replay discs that were recorded either in PAL or in NTSC format. Choose NTSC if the equipment is connected to a TV that requires NTSC coded signals. [. . . ]