User manual BLAUPUNKT KOPENHAGEN RCR 45

[. . . ] Radio / Cassette Kopenhagen RCR 45 Operating instructions 1 2 3 4 5 6 7 19 18 17 16 15 14 8 9 10 11 12 13 3 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Contents Short instructions . . . . . . . . . . . . . . . . . . . . . . . . 21 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NDR 1, 2, 3, 4, N-JOY (North German broadcaster). For this it is necessary that the stations have been received at least once and that "AF" has been activated before (lights up in the display). For this purpose, you may start Travelstore seek operation: · Press FM for 2 seconds; the system starts to run through the frequency band. If "AF" does not light up, · press AF. Storing stations On FM, you can store six stations on the preset buttons 1 to 6 for each of the memory banks I, II and T. · Select the desired memory bank. · · Tune in a station with the rocker switch (either automatically or manually). Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds, confirmed by beep). The activated preset button is indicated in the display. SVENSKA NEDERLANDS ITALIANO Scrolling through the broadcasting network FRANÇAIS ENGLISH DEUTSCH Notice: Should you tune in a station which has already been stored before, the corresponding preset button and the memory bank will briefly flash in the display if you have selected another memory bank. Recalling stored stations You can recall any stored station by pressing the corresponding preset button. · Select the waveband using FM or TS. · Briefly press the corresponding preset button. Automatically storing the strongest stations with Travelstore Sampling stored stations briefly (Preset Scan) You can automatically store the six most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press the TS button for more than 2 seconds. The radio will search for the strongest FM stations and store them on the memory bank T (Travelstore). When this process has been completed, the radio will play the first station. If desired, stations can also be stored manually on the Travelstore bank (see "Storing stations"). With this function you can briefly sample all PS stations. The radio will briefly play all the stored stations one after another. The system will sample the stations of one of the memory banks I, II, or T, depending on which bank was selected before. To switch off Preset Scan: · Press PS once again. The radio will continue to play the currently sampled station. To start the scan: · Press SC briefly. The scanned frequency or the station name will start flashing in the display. During the actual scanning process "SCAN" will be displayed. To select a station currently being scanned and switch off the scan function: · Press SC briefly. [. . . ] For more information, see chapter "Traffic Memo (TIM), Adjusting the TIM standby mode). To adjust the traffic announcement volume from between 1 to 9. The message will then come through at this volume. (1 = low) Confirmation tone for all functions which require a button to be pressed for more than 2 seconds. [. . . ]