User manual BLAUPUNKT LAGUNA CD36

[. . . ] Keys 1 - 6 Short press: BND button, to select the FM memory bank and the AM waveband, source selection to radio mode. 16 Displaying the time continuously when the unit is off and the ignition is on 16 Briefly displaying the time when the unit is switched off . We hope you enjoy using this new piece of equipment. Before using the device for the first time, please read these instructions carefully. [. . . ] This unit can receive programmes broadcast over the FM and AM frequency ranges. There are three memory banks for the FM range and one for the AM range. Six stations can be stored in each memory bank. selecting the FM memory bank or the AM frequency range respectively Press the BND· TS button < to switch between the FM memory banks (FM1, FM2 and FMT) and the AM frequency range respectively. There are various ways of tuning into a station. automatic seek tuning Press the or button 8. The unit tunes into the next receivable station. Setting the sensitivity for station seek tuning You can configure the radio to only tune into stations with a strong reception or to also tune into those with a weak reception. Press one of the station buttons 1 - 6 ; for longer than 2 seconds to store the station to that button. You can automatically store six stations with the strongest reception in the region. The stations are stored in the FMT or AM memory depending on the selected frequency range. Note: Stations that were previously stored in this memory are deleted in the process. After the process is completed, the station that is stored in location 1 of the respective memory bank will be played. Starting SCAN Keep the MENU button 7 pressed until the scan process starts. Scanning is stopped and the station that was tuned into last will remain active. When you have finished making your changes, press the MENU button 7 twice. Select the memory bank in which the station was stored. You can briefly play all the receivable stations by activating the scan function. You can set the scanning time to between 5 and 30 seconds in the menu. You can choose to continuous display one of the followings: Band and Time Band and Frequency Keep the DIS button : pressed until the required display appears. You can use this unit to play standard CDs, CD-Rs and CD-RWs with a diameter of either 5 or 3 inches. To ensure the system functions properly, only use CDs labelled with the compact disc logo. [. . . ] To play all the tracks on the current CD in random order, briefly press button 5 MIX ;. To play the tracks on all the inserted CDs in random order, press button 5 MIX ; longer than two seconds. To briefly play all the tracks on all inserted CDs in ascending order, press the MENU button 7 for longer than two seconds. "TRK SCAN" appears briefly follows by blinking the track number of the CD track being scanned. [. . . ]