User manual BLAUPUNKT LOS ANGELES MP71 US

[. . . ] 6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Starting CD operation and inserting the CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Removing the CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Selecting a track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the softkey 4 indicating "ST1" "ST6" for the desired station. 14 RADIO OPERATION Scanning through available stations (Radio SCAN) You can listen to short samples of all currently receivable stations. The length of the samples can be set, in the menu, to between 5 and 30 seconds. Start radio SCAN To start the radio scan: ENGLISH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS PORTUGUÊS ESPAÑOL FRANÇAIS Scanning through stations Stop the SCAN, continue listening to a station Press any button on the arrow block 7. The scanning process is stopped, and the last station sampled continues playing. Setting sample duration (Scantime) Press the MENU button, 8. Press the or button 7 until "SCANTIME" appears in the display. Press the TUNE button > when the radio is operating. The radio function menu is shown on the display. Set the desired sampling time by pressing or 7. Press the softkey 4 indicating "SCA". The scanning process starts. "SCAN" appears briefly in the display, after which the current station name or the frequency is displayed, flashing. Scan through the pre-set stations You can listen to short samples from all the stations saved on the various memory levels that can currently be received. The length of the samples can be set, in the menu, to between 5 and 30 seconds. Start pre-set SCAN To start the pre-set scan: Press the OK button 5 or the MENU button 8 to leave the menu. Note: The selected sample length also applies to scanning in CD, tape cassette, MiniDisc and CD changer mode (depending on how your device is equipped). Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your radio can receive and display this information. Switch on the SHARX function when stations are crowded. Switching SHARX on and off Changing information displayed You can select which information is shown on the display. The upper display line (the headline) can display the station name, frequency or program type. The lower display line (DOT field) can display the time or the memory level. Changing the headline Hold down the DIS button : until the desired information is displayed, i. e. station name, frequency or program type. Changing the DOT field Press the MENU button 8. Press the or button 7 until "SHARX" appears in the display. "NO SHARX" means that the function is not active, while "SHARX ON" means that the bandwidth selection is operating automatically. Press the Hold down the DIS button : for longer than one second. The display switches between time and memory level. Setting the tuner You can set the tuner for use in the USA or Latin America. Press the OK button 5 or the MENU button 8 to leave the menu. The settings are then saved. Press the MENU button 8. [. . . ] or or buttons 7 in order to switch the spectrometer on or off. Press the OK button 5 or the MENU button 8 to leave the menu. The settings are then saved. In order to select the next filter, first press the OK button 5 then the button 7. tings, press the DEQ button 6. When you have completed all the set- Selecting the tone preset You can choose preset tone settings for the following musical styles. ROCK DISCO JAZZ CLASSIC VOCAL 27 EQUALIZER Equalizer adjustment guide Tone impression/problem Bass too quiet Action Bass boost with Filter: "LOW EQ" Frequency: 50 to 100 Hz Level :+4 to +6 dB Reduce lower middle tones with Filters: "LOW EQ", "MID EQ" Frequency: 125 to 400 Hz Level : approx. [. . . ]