User manual BLAUPUNKT LUCCA 3.3 CC SPAIN/ PORTUGAL

[. . . ] Long press: Switch the RDS function on/off. Arrow buttons MENU button Short press: Open the settings menu. AUDIO button to adjust the bass, treble, balance and fader. To activate, deactivate and adjust the X-BASS function. [. . . ] Note: The RDS function must be activated before you can use this feature. press the MENU button 8. Note: You can set different sensitivity levels for FM and MW or LW (AM) (MW/LW only on the Brighton MP35). Press the or button 7 to switch to the next station on the broadcasting network. Storing stations Storing stations manually Select the memory bank that you want (FM1, FM2, FMT) or one of the wavebands (MW or LW) (MW/ LW only on the Brighton MP35). Tune into the station that you want. Note: When using this feature, you will only be able to switch to stations that you have received once before already. Press the or button 7 repeat- ENGLISH RADIO MODE PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Note: If the tuner does not find a station that matches the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. The radio will then retune to the station that it received last. If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD/MP3 mode or CDchanger mode to the station whose programme type matches the one you selected. Switching PTY on/off Selecting the PTY language You can select the language in which the programme types are displayed. The following are available: "DEUTSCH", "ENGLISH" and "FRANÇAIS". Press the MENU button 8. Press the or button 7 repeatedly until "PTY LANG" appears in the display. Set your preferred language using buttons 7. the When you have finished adjusting the setting, press the MENU button 8 twice. Selecting a programme type and starting seek tuning Press the or button 7. The current programme type appears in the display. If you want to select another programme type, you can do so by pressing the or button 7 whilst this display is visible. The selected programme type appears briefly in the display. We do not accept responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Problems might be experienced when playing copy-protected CDs. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!Besides being able to play audio CDs on this device, you can also play CDs containing MP3 music files. For further details, please read the "MP3 mode" chapter. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH CD mode Note: If the vehicle ignition was switched off before you inserted the CD, you will first have to switch on the device by pressing button 1 in order to start playing the CD. If there is already a CD inserted in the drive, press the SRC button 2 repeatedly until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Selecting tracks Press one of the arrow buttons 7 to select the next or previous track. If you press the or button 7 once, the current track will be played again from the beginning. Fast track selection For fast track selection (backwards or forwards), press and hold down one of the / buttons 7 until fast-reverse / fast-forward track selection begins. Switching to CD mode If there is no CD inserted in the drive, Gently push the CD with its printed side uppermost into the drive 5 until you feel some resistance. The drive draws in the CD automatically. You must not assist or hinder the drive as it draws in the CD. [. . . ] You can set the X-BASS boost in steps ranging from 1 to 3. "XBASS OFF" means that the X-BASS function is switched off. Adjusting the X-BASS boost press the AUDIO button 9. "BASS" appears in the display. Press the button 7 repeatedly until "POP", "ROCK", "CLASSIC" or "EQ OFF" appears in the display. or button 7 to select one of the presets or select "EQ OFF" to switch off the equalizer. If you select one of the presets, it is shown continuously in the display. [. . . ]