User manual BLAUPUNKT LUCCA 3.3 D-A-CH OST EUROPA

[. . . ] Short press: MENU button to open the basic settings menu. X-BASS button, to adjust the XBass function. 9 : ; < Short press: AUDIO button, to adjust the bass, treble, balance and fader settings. button, to display Long press: the time. Short press: TRAF button to switch traffic information standby on/off. [. . . ] To increase the volume, Gently insert the CD with the printed side uppermost into the drive until you feel some resistance. The CD will be drawn automatically into the drive. You must not hinder or assist the drive as it draws in the CD. CD playback begins. turn the volume control 3 to the right. To decrease the volume, turn the volume control 3 to the left. Setting the power-on volume You can set the default volume at which the unit switches on. Press the MENU button 7. Keep pressing the or button 5 until "ON VOL" appears in the display. Set the power-on volume using the and buttons 5. To help you adjust the volume more easily, the volume will be increased / decreased as you make your changes. If you change the setting to "LAST VOL", the power-on volume will be the same as the volume level that was set before the unit was last switched off. Note: To protect your hearing, the maximum power-on volume that can be set for "LAST VOL" setting is "38". If the volume was higher before the unit was switched off and "LAST VOL" was selected, the volume will be set to "38" the next time the radio is switched on. 30 ADJUSTING THE VOLUME DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH When you have finished making your changes, press the MENU button 7 twice. Instantaneous volume reduction (mute) This feature allows you to instantaneously reduce (mute) the volume to a level preset by you. Briefly press button 2. "MUTE" appears in the display. There are three memory banks for the FM range and one for each of the MW and LW wavebands. Six stations can be stored in each memory bank. Set the required sensitivity using the and buttons 5. Press the MENU button 7. 33 RADIO MODE Tuning into stations manually You can also tune into stations manually. Note: You can only tune into stations manually if the RDS function is deactivated. Press one of the station buttons 1 6 : for longer than one second to store the station to that button. Storing stations automatically (Travelstore) You can automatically store the five stations with the strongest reception in the region (only for FM). The stations are stored in the FMT memory bank. Note: Stations that were previously stored in this memory bank are deleted in the process. Press the or button 5. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". Note: If you want to use this feature, the RDS function must be activated. or button 5 to switch to the next station on the broadcasting network. When using this feature, you will only be able to switch to stations that you have received once already. To do so, use either the Travelstore function or allow the automatic seek tuning feature to run once through the entire frequency range. Keep the BND·TS button < pressed for longer than two seconds. "T-STORE" appears in the display. After the process is completed, the station stored in FMT memory location 1 will be played. Press the Listening to stored stations Select the memory bank on which the station was stored. Press the station button of the station you want to listen to. Storing stations Storing stations manually Scanning receivable stations (SCAN) You can briefly play all the receivable stations. [. . . ] Briefly displaying the time when the unit is switched off To briefly display the time when the unit is off, The hours flash. Adjust the hours using the buttons 5. When you have finished making your changes, press the MENU button 7 twice. Selecting 12/24-hour clock mode Press the MENU button 7. "MENU" appears in the display. press the AUDIO ( ) button 9. The time is displayed for around 8 seconds. Keep pressing the or button 5 until "24 H MODE" or "12 H MODE" appears in the display. 42 SOUND AND VOLUME DISTRIBUTION SETTINGS To adjust the left/right volume distribution (balance), DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Sound and volume distribution settings You can adjust the sound settings for each source separately (radio, CD, CD changer/Compact Drive MP3 and AUX). Adjusting the balance settings press the AUDIO button 9. "BASS" appears in the display. Adjusting the bass settings To adjust the BASS, Keep pressing the press the AUDIO button 9. "BASS" appears in the display. or button 5 until "BAL" appears in the display. Press the Press the or button 5 to adjust the bass. When you have finished making your changes, or button 5 to adjust the balance (right/left). [. . . ]