User manual BLAUPUNKT LUCCA 3.3 FRANKREICH

[. . . ] SRC button to switch between CD, CD changer (if connected) and AUX. Arrow buttons MENU button to open the basic settings menu Keys 1 - 6 button to eject the CD from the device 2 3 7 4 5 8 9 : ; 28 CONTENTS Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When you have finished making your changes, briefly press button 2 again. Setting the mute level You can set the device's mute volume level. Press the MENU button 9. Press the or button 8 repeatedly until "MUTE LVL" appears in the display. press the MENU button 9. Mute while telephoning (Freiburg CD34) If your car audio system is equipped with a mobile telephone, it will automatically switch to mute when you use the phone. This will only work if the mobile phone is connected to the car audio system as described in the installation instructions. The volume will be reduced to the configured volume mute level. Adjust the mute level using the buttons 8. When you have finished making your changes, press the MENU button 9 twice. 34 ADJUSTING THE VOLUME Telephone audio (Alicante CD34) If your car sound system is connected to a mobile telephone, the sound system's volume will be muted as soon as you "pick up" the telephone. The telephone call is then outputted over the car sound system's loudspeakers. This requires that the mobile telephone be connected to the car sound system as described in the installation instructions. You will need a cable for this with the following Blaupunkt number: 7 607 001 503. If the sound system receives a traffic announcement during a telephone call, the system will only play the traffic announcement after you have finished the call. You can set the volume at which you want telephone calls to be initially heard. Cancelling SCAN and continuing listening to a station You can use the PTY function to select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Note: If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. The radio will then retune to the station that it received last. If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CDchanger mode to the station whose programme type matches the one you selected. Switching PTY on/off Press the MENU button 9. Scanning stops and the radio continues playing the station that it tuned into last. Setting the scanning time Press the MENU button 9. Press the or button 8 repeatedly until "SCAN TIME" appears in the display. Set the scanning time that you buttons 8. want using the When you have finished making your changes, press the MENU button 9 twice. Note: The scanning time that you set is also applied by the system to scanning carried out in CD and CDchanger mode. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS 38 Press the MENU button 9. [. . . ] Note: You can only adjust the sound settings for traffic announcements whilst a traffic announcement is actually being played. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Sound Setting the left/right volume distribution (balance) To adjust the left/right volume distribution (balance), press the AUDIO button 6. "BASS" appears in the display. Press the Press the button 8 repeatedly until "BAL" appears in the display. Adjusting the bass Press the AUDIO button 6. "BASS" appears in the display. When you have finished making your changes, or button 8 to adjust the balance (right/left). When you have finished making your changes, press the AUDIO button 6. Adjusting the front/back volume distribution (fader) To adjust the front/back volume distribution (fader), Press the press the AUDIO button 6. "BASS" appears in the display. press the AUDIO button 6. [. . . ]