User manual BLAUPUNKT LUCCA 3.3 LOW BENELUX

[. . . ] Do not make a destination entry unless your vehicle is stationary. Contents Safety Information . . . . . . . . . . . . . . . 2 General Information . . . . . . . . . . . . 5 About these operating instructions . 5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 How navigation works . . . . . . . . . . . . . . . . . . . . . . . . 6 Switching the unit on . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Overview 1 2 3 4 5 6 Arrow Distance to destination Driving time or time of arrival Name of the road you are currently travelling on Name of the road onto which the next turn will be made Bar indicating the distance to the next turn 24 5 3 2 1 6 4 Activating the symbol display mode 1. To switch from the map display to the symbol display, press OK during the map display. A selection menu will appear on the bottom left edge of the display. Route guidance will continue using the arrow symbols. Plus Point: When you open the selection menu, the last function selected is always marked. 2. Route guidance Route guidance with map display When you use route guidance with the map display, you can select a map showing your position surroundings (current vehicle position) or the destination surroundings. The map showing your position surroundings changes in its alignment to indicate your driving direction ("Automatic") or can be made to point due north. In addition, you can select map display with "Intersection zoom". This means that the small scale used during route guidance, e. g. 0. 5 mi, will automatically switch to a larger scale, e. g. 0. 1 mi, when you approach an intersection. After you have completed the turn, the map will automatically revert to the scale used previously. Press The map will appear in the new scale. Plus Point: You can also use scale. OK . 2. directly in the map display to alter the 27 Allgemeines Kurzanlei- Zieleingabe Touren Zielspeicher Einstellun- Anhang Route guidance Information on the map You can also have such additional information as car parks and petrol stations displayed in symbol form on the map. Die folgenden Exhibition centre Car rental Ferry Border crossing Authorities Places of interest Gas station Car mechanics 1. Motorway exit Train station Airport Hotel Parking Other destination Theatre/Culture Motorway service Shopping centre Restaurant Hospital Police Sport facilities 28 Plus Point: You can select car mechanics for your make of vehicle. The "Settings" menu will appear. 3. A list of the available information will appear. Mark the information you want displayed on the map. A "checkmark" should appear in front of every type of information you want displayed. Plus Point: On the top line of the menu you can either select or unselect all of the information at once. Once you have selected all of the information you want displayed on the . map, press "OK" on the top line of the menu will be marked. Route guidance 5. [. . . ] Navigation will be reloaded. 54 2. Note: Destinations and tours programmed during the demonstration mode will not be saved in the destination memory when the demonstration mode has ended. The demonstration mode remains active until the TravelPilot DX-N is restarted or until it is deactivated. If you would like to deactivate the demonstration mode, select "Settings" menu. The sub-menu for other settings will appear. [. . . ]