User manual BLAUPUNKT MUNCHEN RDM 126

[. . . ] Radio / CD München RDM 126 Operating instructions 1 20 19 2 3 4 5 6 7 17 8 9 10 11 12 13 14 16 15 18 3 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Quick reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · For this purpose, you may start Travelstore seek operation: · Press FM for two seconds; the system starts to run through the frequency band. If "AF" does not light up, · press AF. With this, the requirements for selecting stations with << >> are fulfilled. · Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds, confirmed by beep). The activated preset button is indicated in the display. Notice: Should you tune in a station which has already been stored before on another memory bank, the corresponding preset button and the memory bank will briefly flash in the display. Changing the memory bank You can shift between the memory banks I, II and T in order to store stations and recall them later. The currently selected memory bank is indicated in the display. · Press the FM button as many times until the desired memory bank lights up in the display. Automatically storing the strongest stations with Travelstore You can automatically store the six most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press the TS button for two seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the first station. Scrolling through the broadcasting networks You can use the << >> buttons to tune in stations of your reception area. If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e. g. For this it is necessary that the stations have been tuned in at least once and that "AF" is active (lights up in the display). Storing stations On FM, you can store six stations on the preset buttons 1 to 6 for each of the memory banks I, II and T. · Select the desired memory bank. · Tune in a station with the rocker switch (either automatically or manually). 40 If desired, stations can also be stored manually on the Travelstore bank (see "Storing stations"). Scanning stations with Radio-Scan You can also scan all stations which can be received. To start the Scan function: · Press SC/MIX briefly. The scanned frequency or the station name will start flashing in the display. During the actual scanning process "SCAN" will be displayed. To select a scanned station and switch off the Radio-Scan function: · Press SC/MIX briefly. If no station is selected, the scan function will be automatically switched off after the frequency band has been run through completely. The unit will tune in the station listened to before starting the scan. Selecting the seek tuning sensitivity You can alter the automatic seek tuning sensitivity. [. . . ] The card supplied with the radio is used to display the model name, type number (7 6. . ) and the serial number. With the extra card it is possible to display the Short Additional Memory (S. A. M. ) data entered by your specialised dealer. See chapter "Short Additional Memory S. A. M. ". If you remove the KeyCard during the reading process, "READ KC" will show on the display panel. [. . . ]