User manual BLAUPUNKT MONTERREY MP35

[. . . ] Radio / CD / MP3 Key West MP35 Monterrey MP35 Syracuse MP35 Operating instructions 7 645 280 510 7 645 485 510 7 645 480 510 http://www. blaupunkt. com Open here 2 1 2 3 12 4 11 10 9 8 7 6 5 3 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH CONTROLS 1 2 3 4 Button to switch the unit on/off and to mute the unit. button to open and release the control panel. Short press: BND button, to select the FM memory bank and the AM waveband, source selection to radio mode. Long press: TS, to start the Travelstore function. [. . . ] Beside playing CDs containing audio data, CDs containing MP3 files can also be played on this device. Descriptions of the "MP3 mode" can be found after this chapter. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Problems might be experienced when trying to play copy-protected CDs. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!Contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no liability for any damage to the CD drive or CD that may occur as a result of the use of unsuitable CDs. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS CD mode Switching to CD mode If there is no CD inserted in the drive and the unit is playing Radio, CD Changer or AUX mode, button 2. Gently insert CD with the printed side uppermost into the drive until you feel some resistance. The CD is drawn into the drive automatically. Setting the display You can choose to continuous display one of the followings: Band and Time Band and Frequency Keep the DIS button : pressed until the required display appears. 13 CD MODE You must not hinder or assist the drive as it draws in the CD. Gently close the control panel whilst exerting a little pressure until you feel it clicks into place. Note: The unit will remain off if the ignition is off. To turn it on and play the inserted CD, press button 1 once. If a CD is already inserted in the drive and the unit is playing Radio, CD Changer or AUX mode. Press the SRC button ; repeatedly until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Stopping MIX Press button 5 MIX 9 again. "MIX OFF" appears briefly in the display and the MIX symbol disappears. Scanning tracks (SCAN) You can briefly play all the tracks on a CD. Press the MENU button 7 for longer than two seconds. The next track will then be played for scantime as set in the "Setting the scantime". For further details, please read the section entitled "Setting the scantime" in the "Radio mode" chapter. Stopping SCAN and continuing playback To stop scanning, press the MENU button 7. The current track will then continue to be played. Selecting tracks Press one of the arrow buttons 6 to select the next or previous track. [. . . ] The "R" setting flashes. Press the press the MENU button 7. The settings are saved. If you want to cancel the colour scan without setting a new colour, or button 6 repeatedly until the setting that you want is displayed after "R". or button 6 to move the selection cursor to the position after the other colour ("G"). Press the press the or button 6. Adjust the other colour to suit your preferences. When you have finished making your changes, Note: If you do not press a button, the colour scan will stop after cycling through the colours once (approx. [. . . ]