User manual BLAUPUNKT MONTREAL RCM 45

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLAUPUNKT MONTREAL RCM 45. We hope that this BLAUPUNKT MONTREAL RCM 45 user guide will be useful to you.

Lastmanuals help download the user guide BLAUPUNKT MONTREAL RCM 45.


Mode d'emploi BLAUPUNKT MONTREAL RCM 45
Download

You may also download the following manuals related to this product:

   BLAUPUNKT MONTREAL RCM 45 annexe 1 (124 ko)

Manual abstract: user guide BLAUPUNKT MONTREAL RCM 45

Detailed instructions for use are in the User's Guide.

[. . . ] When drilling holes, be sure not to damage any vehicle parts (battery, cable, fuse box, etc. The positive cable must have a cross-section of at least 1 mm. the unit is protected by a quick-acting fuse of 5 A. [. . . ] Ground cable Do not connect the ground cable to the negative pole of the battery. Route the ground cable to a suitable ground point (car body screw, car body metal sheet) and shorten it accordingly. Remove the insulation from the ground cable and attach the forked cable lug (if necessary, solder it). Scratch off the paint from the contact area of the ground point and lubricate it with graphite grease (important for good ground contact). Install the car radio into the DIN cutout provided in your car's dashboard ex factory. Prepare the car radio DIN cutout (unlock shelf or dummy cover) or cut out the car radio compartment to 182 x 53 mm. Grasp behind the car radio cutout and check how many of the fixing strips of the car radio support may be bent. note: Try to bend as many fixing strips as possible. Insert the support into the cutout and bend the appropriate fixing strips with a screwdriver, see fig. If the plus cable is connected to pin 15 of the fuse holder (plus connected via ignition lock) downstream of the fuse, the in-car radio can be switched on and off with the ignition key. In addition, the set automatically switches off after one our in order to avoid that the battery goes flat. The hour logic will not be activated whrn connecting the permanent +12 V line (terminal 30). Connection with multiple plug installed ex factory For vehicles with a system plug installed ex factory Blaupunkt offers an adapter cable for the common vehicle types, see fig. For Audi, Opel and VW vehicles an adaptor cable must be used although these cars have a pre-equipped ISO connector. [. . . ] Stick in byglar till vänster och till höger i de befintliga hålen i panelen och tryck in så långt, att ett tydligt knäpp hörs (sidofjädrarna går ur ingrepp). Om denna kontakt ansluts till bilstereon kortsluts styrspänningen till antenn/förstärkare mot jord och en ledningsbana i radion brinner av. Telephone Mute Quando o telephone chama ou entra em funcionamento, o som do aparelho é cortado automaticamente. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BLAUPUNKT MONTREAL RCM 45

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BLAUPUNKT MONTREAL RCM 45 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag