User manual BLAUPUNKT NASHVILLE DJ
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLAUPUNKT NASHVILLE DJ. We hope that this BLAUPUNKT NASHVILLE DJ user guide will be useful to you.
Lastmanuals help download the user guide BLAUPUNKT NASHVILLE DJ.
Manual abstract: user guide BLAUPUNKT NASHVILLE DJ
Detailed instructions for use are in the User's Guide.
[. . . ] If the setting remains unchanged within 8 seconds, the display will switch back to the previous condition. 4 lo lo (local) - To alter the seek tuning sensitivity during radio operation. If "lo" is displayed, the radio will only pick up strong, local stations (normal sensitivity). If "lo" does not light up, the radio will also pick up weaker, distant stations (high sensitivity). [. . . ] · · Press preset buttons 1 and 4 simultaneously and hold down while switching the set on again. The display briefly shows "CODE" and the unit will switch on. If the display shows four dashes again, you have entered a wrong code. Re-enter the correct code after the waiting time ("CODE" will appear in the display). If you switch off the set while it is blocked, the waiting time will start anew as soon as the radio is turned on again. The display will briefly show "CODE" each time the set is turned on.
Switching on security coding
Re-start following an interruption of the power supply (coding system is activated)
Radio operation with RDS (Radio Data System)
Switching off security coding
· · · · Turn off the radio. Press preset buttons 1 and 4 simultaneously and hold down while switching the set on again. The Radio Data System offers you more convenience when listening to FM radio stations. More and more radio stations have begun to broadcast RDS information alongside their programmes. As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS offers you further advantages: If "SEARCH" appears in the display when switching on the radio or recalling one of the stored frequencies, the unit is automatically searching for an alternative frequency. "SEARCH" will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely. the Alternative Frequency function and manual tuning are switched off.
You can shift between the memory banks I, II and T in order to store stations and recall them later. · Toggle the FMT button until the desired memory bank lights up in the display.
Prerequisite: "m" lights up in the display. ; the frequency will change in · Press short intervals in upwards or downwards direction. or button down, the When holding the frequency scan is speeded up.
Changing the memory bank
If you leave the service area of the regional programme tuned into, or if you would like to take advantage of the full RDS service, switch to "REG OFF". · Press the AF button for approximately 2 seconds until "REG OFF" appears. When active, "REG ON" will be briefly displayed each time the radio is switched on.
Use the AF and lo buttons (lo, m, -, lo) to adjust the respective modes. ; the car radio will automati· Press cally search for the next station. When keeping the or the button depressed, seek tuning will speed up in upwards or downwards direction.
Switching from stereo to mono (FM)
If reception is poor, you may get better sound quality by switching to mono: · Press the lo button until a beep sound disis released and the stereo sign appears from the display. Each time the radio is switched on, stereo playback is activated ( is displayed). [. . . ] Store your tapes in a cool place away from dirt, dust and temperatures exceeding 50 ° Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust particles collected on the playback head or roller may lead to tape run problems and sound distortions. Do not attempt to clean by inserting a hard object into the player!
Selecting a title
To select a title in upwards direction, · press briefly. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BLAUPUNKT NASHVILLE DJ
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BLAUPUNKT NASHVILLE DJ will begin.