User manual BLAUPUNKT OREGON DJ71

[. . . ] 35 Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 International telephone information . . . . . . . [. . . ] The settings are then saved. Press the MENU button, 8. Press the or button, 7, as often as is necessary for "FM-SENS" to appear in the display. The current value of the sensitivity is shown on the display. "SENS 6" indicates the maximum sensitivity for the reception of distant transmitters, and "SENS 1" indicates the lowest sensitivity. Setting the station There are a number of ways to set the station. Automatic station search Adjust the desired sensitivity with the key, 7. Press the or button, 7. The next station that can be received is tuned in. Manual station tuning You can also tune to the station manually. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Press the or button, 7. Note: Manual station tuning is only possible if the RDS convenience function is deactivated. 43 RADIO OPERATION Saving a station Saving a station manually length of the samples can be set, in the menu, at between 5 and 30 seconds. Starting radio SCAN To start the radio scan Choose the desired memory level from FM I, FM II, FMT or one of the other wavebands, MW or LW. press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Tune in the desired station as described under "Setting the station". Hold down the softkey, 4, indicating the station "ST1" - "ST6" in which the station is to be stored for longer than two seconds. Press the softkey, 4, indicating "SCA". The scanning process starts. "SCAN" is shown on the display for a short time, after which the current station name or the frequency is displayed, flashing. Scanning through the preset stations You can listen to short samples from all the stations saved on the various memory levels that can currently be received. If the selected station, or another station from the station chain, starts to transmit the desired program type at press the TUNE button, >, or wait for eight seconds. Selecting the program type and starting the search Press the or button, 7. The current program type is shown on the display. If you want to change to a different program type press the or button, 7, as often as necessary, until the desired program type is displayed. Or In order to select a saved program type, press one of the softkeys, 4, indicating "ST1" to "ST6". The selected program type is briefly displayed. In order to start the search press the or button, 7. The next receivable station with the selected program type is tuned in. 45 RADIO OPERATION Note: If no station is found with the chosen program type, a beep is sounded, and the display briefly shows "NO PTY". The tuner returns to the most recently received station. Storing the program type on the station button Adjusting HICUT Press the MENU button, 8. Press the or button, 7, as often as is necessary for "HICUT" to appear in the display. or buttons, 7, in order to adjust the HICUT. "NO HICUT" means that the function is inactive, while "HICUT 3" indicates the strongest automatic reduction of the treble and the interference. Press the Select a program type with the button, 7. or In order to save a program type, hold down one of the softkeys, 4, indicating "ST1" to "ST6", for more than one second. The program type is saved at the chosen location. [. . . ] -4 Reduce middle tones with Filters: "MID EQ", "HIGH EQ" Frequency: 1, 000 to 2, 500 Hz Level : -4 to -6 Boost treble tones with Filter: "HIGH EQ" Frequency: approx. 12, 500 Hz Level : +2 to +4 Bass sounds muddy Booming tone Unpleasant pressure Tone lacks depth, is aggressive, no stereo effect. Muffled tone Lack of clarity Instruments have no brightness 58 EXTERNAL AUDIO SOURCES TMC DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH External audio sources Instead of the CD-changer, you can connect an external audio source with line output. Such sources might be a portable CD player, a MiniDisc player or an MP3 player. The AUX input must be switched on in the menu. [. . . ]