User manual BLAUPUNKT PORTLAND CM85

[. . . ] Graphic representation of the adjusted volume level. Display field 2: Radio mode Radio frequency or station name PTY programme type Clock display Cassette mode TAPE1/TAPE2 - side of tape playing Active functions (e. g. CPS) Clock display DSC Serves as display and input field during DSC programming Clock display Miscellaneous Indicates new source (e. g. when changing from radio to cassette) and active functions (e. g. BASS, SCAN) Display field 3: Active functions - Stereo - Cassette inserted - Loudness FRANÇAIS LD Radio mode AF - Alternative Frequency for RDS PTY - RDS programme type TA - Priority for traffic information TP - Traffic programme station lo - Seek tuning sensitivity 21 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO ENGLISH DEUTSCH Display Contents Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Thanks to the release panel's wellplanned design, it is very easy to attach and detach. Note: Do not pull the release panel straight out from the chassis, but rather slide it to the left to detach it as illustrated below. Do not expose the release panel to direct sunlight or other heat sources. If the unit was still in operation, it will turn off now. All current settings will remain stored. If a cassette is inserted, it will remain in the unit. The unit will turn on again automatically when you re-attach the release panel. Use only Blaupunkt-approved accessories and spare parts. If you are listening to a particular regional programme and wish to continue doing so, select "REG ON" in the DSC mode. If you leave the service area of the regional programme you are tuned into, or if you would like to take full advantage of RDS service, switch to "REG OFF" in the DSC mode. AF - Alternative frequency Selecting the operating mode Use the SRC (source) button to select between radio and cassette mode. To select the operating mode: · Press SRC. The AF (Alternative Frequency) function makes sure that the radio always tunes into the strongest frequency for the currently selected programme automatically. If this function is activated, "AF" will appear in the display. To start the Scan function: · Press SCA briefly. The scanned frequency or the station name will start flashing in the display. During the scanning process "SCAN" will appear in the display. To select a scanned station/switch off the Scan function: · Press SCA briefly. Automatically storing the strongest stations with Travelstore You can automatically store the six FM stations with the most powerful signals in your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press the BA/TS button for 2 seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the strongest station. If desired, stations can also be stored manually in the Travelstore bank (see "Storing stations"). Scanning stored stations with Preset Scan You can scan all of the stored stations on any of the wavebands. To start Preset Scan: · Press SCA for approx. [. . . ] · Press / to select a character you want to enter. Select a dash "_" to leave a blank space. · Press << >> to select the next position. · When you have entered the name completely, press DSC briefly to store the name. [. . . ]