User manual BLAUPUNKT RHODOS CC 25

[. . . ] Radio / Cassette Rhodos CC 25 Operating instructions 1 2 20 19 18 17 16 15 13 14 9 11 12 10 3 PORTUGUES ESPAGÑOL SVENSKA 1 2 3 4 5 6 7 8 NEDERLAND ITALIANO FRANÇAIS ENGLISH Contents Front Panel Description . . . . . . . . . . . . . . 13 Important information . . . . . . . . . . . . . . . . . 14 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Installation/connection . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Therefore, adjust the volume reasonably. Installation/connection The code system can only be switched on and off, if the radio is connected to permanent power. If you like to install your new car radio by yourself or add other audio components to the existing ones, then please read carefully the enclosed instructions on installation and connection. 14 Anti-theft coding The car radio comes standard with the code system deactivated. If the anti-theft coding system is on while the power supply to the unit is interrupted (e. g. theft, disconnecting the car battery), the set is electronically blocked. Then it may only be used again after the appropriate code number has been entered (see car radio passport). The radio will operate again as soon as you have entered the right code number. If you lose your radio passport and have forgotten your code number, you will not be able to restart the set after the power supply has been interrupted. In this case, your radio can only be reset in our central customer service workshop or in one of our service agencies abroad. Restart following interruption of power supply (Code system switched on) · · · Switch on the set. "COD" will appear in the display. Briefly press preset button 1, "000" will appear in the display. Enter the code number given in the Blaupunkt car radio passport: Preset button 1 only allows to choose "0" or "1". The first "0" will not be displayed. - Press preset button 1 until "000" appears in the display. - Press preset button 2 five times, "500" appears in the display. - Press preset button 3 twice, "520" appears in the display. - Press preset button 4 once, "521" appears in the display. To confirm the code number: Press the upper part of the rocker switch . Wrong code number entered It should not be possible for thieves to ascertain the code number by trial-and-error. This is why the set will be blocked for a certain period of time, if an incorrect code number is entered. In this case, "- - -" will appear in the display. This waiting time is 10 seconds after the first three attempts, and 1 hour following subsequent attempts. After 19 unsuccessful attempts, "OFF" will appear in the display and the set can no longer be restarted. Note: Keep you car radio passport with the code number in a safe place in order to avoid "unauthorized access" to your car radio. [. . . ] Once the process is finished, the car radio tunes in to the first station. If required, it is also possible to manually store a station on the Travelstore level. If less than five stations can be received, the free buttons are represented by dashes for a short period of time. SVENSKA NEDERLAND ITALIANO FRANÇAIS Automatically Storing the Strongest Stations (Travelstore) ENGLISH Note: When tuning in an already stored station, display 9 will show the corresponding preset button for approx. In addition, the storage level indicator lights up on display =. [. . . ]