User manual BLAUPUNKT SAN FRANCISCO CD70

[. . . ] Radio / CD San Francisco CD70 Operating instructions Open here Ouvrir s. v. p. Por favor, abrir Favor abrir 2 1 14 2 13 3 12 4 11 10 5 9 8 6 7 3 ESPAÑOL SVENSKA NEDERLANDS PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH PORTUGUÊS CONTROLS 1 2 3 4 5 6 7 8 9 : ; < = button - opens the operating panel Button - switches the radio and mute function on/off Volume control Soft keys - the function of the soft keys depends on the current content of the display OK button - confirms menu entries and leaves the menu DSA button - selects the DSA menu Multifunction rocker switch MENU button - selects the menu for basic settings AUD button - adjusts bass and treble, balance and fader as well as loudness DIS button - changes display contents Display CD button - starts CD playback CDC button - starts CD changer playback (only if connected) or plays an external audio source (only if connected) TUNE button - activates radio mode Selects the radio function menu (only possible in radio mode) > 4 TABLE OF CONTENTS Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you start a PTY scan and no stations are found, this scan will continue to run in the background. As soon as a station with the selected programme type is received, the unit will automatically switch from the current station or from CD / CD-changer mode to the station with the selected programme type. Activating PTY To use the PTY function, Deactivating PTY In radio mode, press the TUNE button >. The Radio Function menu will appear on the display. PTY will light up on the display. Press the soft key 4 with the display allocation "PTY". PTY will no longer be lighted on the display. To return to the basic Radio menu, press the TUNE button > or wait eight seconds. Selecting a programme type and starting a scan Press the or button 7. The current programme type will appear on the display. To select a different programme type, press one of the buttons 7 repeatedly until the desired programme type appears on the display. in radio mode, press the TUNE button >. The Radio Function menu will appear on the display. Or to select a stored programme type, press one of the soft keys 4 that is with the display allocation with the desired programme type. The radio will be tuned to the first receivable station with the selected programme type. Press the soft key 4 with the display allocation "PTY". When PTY is activated, the last programme type selected will briefly appear on the display. To return to the basic Radio menu, Press the Press the TUNE button > or wait eight seconds. The settings are now stored. Note: If no station is found with the selected programme type, then "NO PTY" will appear briefly on the display. The radio will be retuned to the last station received. 18 RADIO MODE ENGLISH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS PORTUGUÊS ESPAÑOL FRANÇAIS Storing a programme type under a station button or button 7 to select a programme type. To store a programme type, Use the or button 7 repeatedly until the desired HiCut level is shown on the display. "HICUT 3" means maximum automatic attenuation of the highs and the noise level. Press the hold down one of the soft keys 4 with the display allocation of a programme type for longer than one second. The programme type will be saved in the selected memory slot. Press the OK button 5 to return to the previous menu level or the MENU button 8 to leave the menu altogether. Interference-related bandwidth selection (SHARX) The SHARX function enables you to virtually eliminate interference from neighbouring stations. Activate the SHARX function in areas with high station density. Activating/deactivating SHARX To activate/deactivate SHARX, Optimising radio reception The HiCut function The HiCut function improves sound quality under poor reception conditions. When there is interference, the highs and thus the noise level are cut automatically. [. . . ] The settings you make depend on the hifi system in your car and the power of your subwoofer. Experiment to find your ideal setting. High-pass filter Setting the high-pass filter If a subwoofer is connected to your car radio, you can use a high-pass filter (HP-F) to suppress the output of lower frequencies through the internal final amplifier and an external preamplifier that may be connected. The settings depend on the unit installed in your car. Experiment to find your ideal setting. allocation "NEXT". Press the soft key 4 with the display allocation "SUB". Press the AUD button 9. [. . . ]