User manual BLAUPUNKT SAN REMO RD 168

[. . . ] Radio / CD Operating instructions Florida RD 168 San Remo RD 168 1 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISCH DEUTSCH 1 2 3 4 5 6 7 8 15 14 13 12 11 10 9 2 The display consists of three fields and varies according to the operating mode and function. - Stereo - CD inserted LD - Loudness Radio mode AF - Alternative Frequency for RDS PTY - RDS programme type TA - Priority for traffic information TP - Traffic programme station lo - Seek tuning sensitivity CD mode RPT ­ Repeat function MIX ­ Tracks played at random 23 PORTUGUÊS ESPAÑOL SVENSKA DSC Permanent display for DSC programming. Graphic representation of the volume level selected. DSC Serves as display and input field during DSC programming Clock display Miscellaneous Indicates new source and the active functions (e. g. SCAN) NEDERLANDS Audio Numeric and graphic representation of the volume and audio settings ITALIANO CD mode Current track CD mode CD time (elapsed playback time), CD number and brief indication of function switch, Clock display FRANÇAIS Display field 1: Radio mode Memory banks and wavebands Brief indication of preset station (e. g. P1) Display field 2: Radio mode Radio frequency or station name PTY programme type Clock display Display field 3: Displays active functions ENGLISH DEUTSCH Display Contents Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS also offers you further advantages: "SEARCH" will disappear from the display when the alternative frequency has been found or after the frequency band has run through completely. If the reception quality of the programme selected deteriorates beyond a certain point, tune into another station. ENGLISH DEUTSCH Selecting the operating mode Radio operation with RDS (Radio Data System) Selecting a waveband The following wavebands are available: UKW (FM) 87, 5 - 108 MHz, MW 531 - 1602 kHz and LW 153 - 279 kHz Press the "BA/TS" button to select the desired waveband. Important: AF and PTY must be switched off (i. e. the symbols do not light up in the display). If necessary, deactivate these function by pressing "AF. TA" or "PTY". Manual tuning: · Press << >>; the frequency will change in short intervals in the corresponding direction. If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up. Press "BA/TS" for 2 seconds; the system will start to run through the frequency band. If "AF" is not lit up, · Press "AF. TA" until you hear a beep. It is now possible to select stations using << >>. · Station tuning Automatic seek tuning · / Press / ; the car radio will automatically search for the next station. If you hold / pressed up or down on the rocker switch, seek tuning will speed up in the corresponding direction. Switching between the memory banks (FM) You can switch between the memory banks I, II and T in order to store stations and recall them later. The currently selected memory bank will appear in the display. · Press the "BA/TS" button as many times as necessary until the desired memory bank lights up in the display. Scrolling through the broadcast networks (FM only) You can use the << >> buttons to tune into stations in your reception area. If it is possible to receive several programmes in the same broadcast network, you can scroll through them in the forwards direction by pressing >>, or backwards using the << button, e. g. For this to work properly you must have already tuned into the stations at least once and "AF" must be active (lights up in the display). To do this, you can start the Travelstore seek operation: Storing stations On FM, you can store six stations on the preset buttons 1 - 6 for each of the memory banks (I, II, T). On MW/LW, you can also store six stations each. · Select the appropriate waveband by pressing BA/TS. · Tune into a station with the rocker switch (either automatically or manually). Automatic seek tuning Up Down <</>> Up/down in short intervals (on FM only if "AF" is switched off) Manual tuning with << >> You can also tune into a station manually. 32 · Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds) or until you hear a beep. The display will indicate which station has been stored. Note: If you attempt to store a station which is already stored, the corresponding station and the station preset will flash in the display if you are in a different memory bank. If desired, stations can also be stored manually in the Travelstore bank, refer to the section on "Storing stations". Recalling stored stations You can recall any stored station at the touch of a button. · Select the waveband by pressing BA/ TS. [. . . ] The clock display will remain visible until the ignition is switched off. LOUDNESS Loudness boosts the bass frequencies at low volume. boost MUTE It is possible to lower the audio volume quickly at the touch of a button. Here you can program the volume to which the audio will drop. PEAK ON: Displays the dynamics of the music signal. [. . . ]