User manual BLAUPUNKT SANTA CRUZ CD32

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLAUPUNKT SANTA CRUZ CD32. We hope that this BLAUPUNKT SANTA CRUZ CD32 user guide will be useful to you.

Lastmanuals help download the user guide BLAUPUNKT SANTA CRUZ CD32.


BLAUPUNKT SANTA CRUZ CD32 : Download the complete user guide (321 Ko)

You may also download the following manuals related to this product:

   BLAUPUNKT SANTA CRUZ CD32 (314 ko)
   BLAUPUNKT SANTA CRUZ CD32 INSTALLATION INSTRUCTION (314 ko)

Manual abstract: user guide BLAUPUNKT SANTA CRUZ CD32

Detailed instructions for use are in the User's Guide.

[. . . ] Radio / CD Alicante CD32, Kiel CD32 Porto CD32 San Remo CD32 Santa Cruz CD32 Operating instructions http://www. blaupunkt. com Bitte aufklappen Open here Ouvrir s. v. p. Öppna Por favor, abrir Favor abrir Åbn her 2 1 12 2 11 3 4 10 5 9 8 6 7 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH DANSK PORTUGUÊS ESPAÑOL CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 6 7 button to release the control panel. Long press: Button, to switch the unit on/off, Short press: To mute the unit's volume. Short press: SRC button, to select the CD, radio, CD changer or Compact Drive MP3 (if connected) and AUX sources. [. . . ] "SENS LO1" means it is set to the lowest sensitivity setting. If "SENS LO" is selected, "lo" lights up in the display. Selecting the waveband / memory bank This unit can receive programmes broadcast over the FM, MW and LW wavebands. There are three memory banks for the FM range and one for each of the MW and LW wavebands. Six stations can be stored in each memory bank. Set the required sensitivity using the and buttons 5. Press the MENU button 7. 33 RADIO MODE Tuning into stations manually You can also tune into stations manually. Note: You can only tune into stations manually if the RDS function is deactivated. Press one of the station buttons 1 6 : for longer than one second to store the station to that button. Storing stations automatically (Travelstore) You can automatically store the five stations with the strongest reception in the region (only for FM). Note: Stations that were previously stored in this memory bank are deleted in the process. Press the or button 5. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". Note: If you want to use this feature, the RDS function must be activated. or button 5 to switch to the next station on the broadcasting network. When using this feature, you will only be able to switch to stations that you have received once already. To do so, use either the Travelstore function or allow the automatic seek tuning feature to run once through the entire frequency range. Keep the BND·TS button < pressed for longer than two seconds. After the process is completed, the station stored in FMT memory location 1 will be played. Press the Listening to stored stations Select the memory bank on which the station was stored. Press the station button of the station you want to listen to. Storing stations Storing stations manually Scanning receivable stations (SCAN) You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu. Select the required FM1 / FM2 / FMT memory bank or MW / LW waveband (MW and LW are not available on the Kiel CD32). Tune into the station. 34 RADIO MODE Starting SCAN Hold down the MENU button 7 for longer than two seconds. "SCAN" appears briefly in the display followed by the current frequency (which flashes). Stopping SCAN and continuing listening to a station Briefly press the MENU button 7. Scanning is stopped and the station that was tuned into last will remain active. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Using the PTY function, you can directly select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Note: If no station is found that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. If the tuned radio station or another station on the broadcasting network broadcasts the required programme type at a later point in time, the radio automatically switches from the currently tuned station or from CD mode / CD changer / Compact Drive MP3 mode to the station whose programme type matches the one you selected. Setting the scantime Press the MENU button 7. Keep pressing the or button 5 until "SCANTIME" appears in the display. When you have finished making your changes, press the MENU button 7 twice. Note: The set scantime also applies to scanning in CD and CD changer mode. Switching PTY on/off Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK MUSIC Press the MENU button 7. Keep pressing the or button 5 until "PTY ON" or "PTY OFF" appears in the display. [. . . ] When you have finished making your changes, press the AUDIO button 9. Adjusting the fader settings To adjust the front/back volume distribution (fader), press the AUDIO button 9. Adjusting the treble settings To adjust the TREBLE, press the AUDIO button 9. "BASS" appears in the display. press the AUDIO button 9. "BASS" appears in the display. Keep pressing the Keep pressing the or button 5 until "TREB" appears in the display. or button 5 until "FADER" appears in the display. Press the or button 5 to adjust the treble. When you have finished making your changes, Press the or button 5 to adjust the fader (front/back). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BLAUPUNKT SANTA CRUZ CD32

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BLAUPUNKT SANTA CRUZ CD32 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag