User manual BLAUPUNKT SANTA MONICA CD30 US

[. . . ] RDS button to switch the RDS feature on/off. CD·C button to select CD, radio and CD changer (if connected) sources. 8 9 : ; < = > AUDIO button to adjust the bass, treble, balance and fader settings. MENU button to open the basic settings menus. TRAF button to switch traffic information standby on/off. [. . . ] CD playback begins. È To do so, press button >. q Note: To protect the vehicle battery, the unit will switch off automatically after one hour if the ignition is off. Switching on/off using the removable control panel È Remove the control panel. The unit switches off. È Attach the control panel again. The unit switches on. The last settings (radio, CD, CD changer or AUX) will be reactivated. Switching on/off using button > È To switch the unit on, press button >. È To switch the unit off, press button > for longer than two seconds. The unit switches off. 29 ADJUSTING THE VOLUME Adjusting the volume The system volume can be adjusted in steps from 0 (off) to 66 (maximum). To increase the system volume, Instantaneous volume reduction (mute) This feature allows you to instantaneously reduce (mute) the volume to a level preset by you. È press È press button button =. =. To decrease the system volume, È Briefly press button >. "MUTE" appears in the display. Setting the mute level You can set the unit's mute volume level. Setting the power-on volume You can set the default volume at which the unit switches on. È Press the MENU button :. È Keep pressing the or button 9 until "ON VOL" appears in the display. È Press the MENU button :. È Keep pressing the or button 9 until "MUTE LVL" appears in the display. È Set the power-on volume using the and buttons 9. To help you adjust the volume more easily, the volume will be increased / decreased as you make your changes. If you change the setting to "0", the power-on volume will be the same as the volume level that was set before the unit was last switched off. Note: q REG must be separately activated/ deactivated in the menu. Switching REG on/off Switching to radio mode If you are in CD, CD changer or AUX mode, È Press the MENU button :. È Keep pressing the or button 9 until "REG" appears in the display. "OFF" or "ON" is displayed alongside "REG". To switch REG on/off, È press the FMT or BAND (TS) button 2. Or È keep pressing the CD·C button 7 until "RADIO" appears in the display. È press the or button 9. È Press the MENU button :. Switching the RDS function on/off To use the RDS functions (AF and REG), Changing the display To briefly display the time, È keep the MENU ( ) button : pressed until the time appears in the display. È press the RDS button 3. The RDS functions are active when "RDS" lights up in the display. When the RDS functions are switched on, "REG ON" or "REG OFF" appears briefly in the display. RDS functions (AF, REG) The RDS functions AF (Alternative Frequency) and REG (Regional) extend your radio's range of functions. q AF: If this RDS function is activated, the unit automatically tunes into the best receivable frequency for the station that is currently set. q REG: At certain times, some radio stations divide their programme into regional programmes providing different regional content. "T-STORE" appears in the display. [. . . ] È Keep pressing the or button 9 until "CLOCKSET" appears in the display. È press the MENU button :. "MENU" appears in the display. È Press the button 9. È Keep pressing the The time appears in the display. The minutes flash on and off and can be adjusted. or button 9 until "CLOCK OFF" or "CLOCK ON" appears in the display. È Adjust the minutes using the buttons 9. Once the minutes are set, / or button 9 to switch between the displays. When you have finished making your changes, È Press the È press the button 9. È press the MENU button :. [. . . ]