User manual BLAUPUNKT SHARK LINE A-R T 06-M

[. . . ] 6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 International telephone information . . . 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Notes and accessories . . . . . . . . . . . . 7 Switching on/off . . . . . . . . . . . . . . . . . . . . . . [. . . ] Cassette play starts. Switching on/off using the removable control panel Remove the control panel. Attach the control panel again. The unit switches on. The last settings (radio, Cassette, CD changer or AUX) will be reactivated. Switching on/off using button 3 To switch the unit on, press button 3. To switch the unit off, press button 3 for longer than two seconds. The unit switches off. 8 ADJUSTING THE VOLUME The volume can be adjusted in steps from 0 (off) to 66 (maximum). ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Adjusting the volume Instantaneous volume reduction (mute) This feature allows you to instantaneously reduce (mute) the volume to a level preset by you. To increase the volume, turn the volume control 2 to the right. To decrease the volume, turn the volume control 2 to the left. Briefly press button 3. "MUTE" appears in the display. Setting the mute level You can set the unit's mute volume level. Setting the power-on volume You can set the unit's default power-on volume. Press the MENU button 8. Keep pressing the or button : until "ON VOLUME" appears in the display. Press the MENU button 8. Keep pressing the or button : until "MUTE LEVEL" appears in the display. When you have finished making your changes, Set the power-on volume using the and buttons :. If you change the setting to "0", the power-on volume will be the same as the volume level that was set before the unit was last switched off. Note: To protect your hearing, the poweron volume is limited to a value of "38". Selecting the AM frequency range press the MENU button 8 or OK ;. Tuning into stations manually You can also tune into stations manually. Press the AM button 5 to select the AM frequency range. Press the or button :. Storing stations Storing stations manually Tuning into a station There are various ways of tuning into a station. Automatic seek tuning Select the required memory level (FM1, FM2 or FMT) or the AM frequency range. Press the or button :. The unit tunes into the next receivable station. Tune into the station. Press one of the station buttons 16 > for longer than one second to store the station to that button. 11 RADIO MODE Storing stations automatically (Travelstore) You can automatically store the six stations with the strongest reception in the region. The stations are stored in the FMT or AM memory depending on the selected frequency range. Note: Stations that were previously stored in this memory are deleted in the process. Stopping SCAN and continuing listening to a station Press the OK button ;. Scanning is stopped and the station that was tuned into last will remain active. Setting the scantime Press the MENU button 8. Keep pressing the or button : until "SCANTIME" appears in the display. Briefly press the TS button ?. "TRAVEL-STORE" appears in the display. Changing Direction of Play To change between SIDE A and SIDE B Press button 2 >. Note: At the end of the tape, the direction of play is automatically reversed (auto-reverse). [. . . ] "BASS" appears in the display. Adjusting the bass settings Press the AUDIO button =. "BASS" appears in the display. Keep pressing the button : until "BALANCE" appears in the display. Press the or button : to adjust the bass. When you have finished making your changes, or button : to adjust the balance (right/left). When you have finished making your changes, Press the press the AUDIO button =. Adjusting the treble settings Press the AUDIO button =. "BASS" appears in the display. press the AUDIO button =. [. . . ]