User manual BLAUPUNKT TP DX-N NAV.COMP.

[. . . ] 5 Blue button for switching the monitor on/off. 6 MODE button For adjusting the 16:9 picture format (Full / Normal / Cinema). 7 Right +/- rocker switch for adjusting the contrast. ; < : RC 09H remote control handset 9 ! [. . . ] The TravelPilot DX-V analyses incoming TMC traffic messages, adapts the planned route to the current traffic situation, and displays traffic reports symbolically on the map display. Plus Point: The TravelPilot DX-V always calculates the optimum route in terms of travelling time; i. e. if a detour around traffic congestion increases travelling time significantly, the TravelPilot DX-V would remain on the route passing through the traffic congestion under certain conditions. This depends on what kind of traffic congestion has been reported and how long it is and on how long the possible detour is. Dynamic route guidance is only possible when the TravelPilot DX-V is connected to a TMC receiver. TMC receivers include the "TMC D-Namic tuner box", which was specially developed for the TravelPilot DX-V, and a number of Blaupunkt car radios. Please contact your authorized Blaupunkt dealer or ring the Blaupunkt telephone hotline (the hotline number is listed on the last page of this instruction manual) to find out which Blaupunkt car radios can be used in conjunction with the TravelPilot DX-V. Plus Point: If you do not have a "TMC-Tunerbox D-Namic" or a suitable Blaupunkt car radio, you can enter a detour manually to avoid traffic congestion. For further details, read the "Using the traffic congestion function" section in the "Route guidance" chapter. 39 Allgemeines Kurzanlei- Zieleingabe Touren Zielspeicher Einstellun- Anhang Dynamic route guidance with TMC Switching TMC on/off The TMC function is switched on or off in the Route options menu. For more information, refer to the section on "Selecting route options". Note If the TMC function is switched on, the options for "Fast route", "Motorway", "Ferry" and "Toll" will be selected automatically in the menu. This behaviour depends on the length and type of traffic problem and the length of the possible detour. 42 Displaying traffic messages Displaying on the map The received traffic messages are displayed on the map using different icons and a dashed line. If the traffic obstruction lies along the route calculated by the navigation system, the traffic congestion symbol is displayed with a red border. The following traffic congestion symbols can be displayed on the map: slow traffic traffic congestion totally blocked Dynamic route guidance with TMC Notes The traffic congestion symbols are displayed in grey on the map if they are not relevant to the route (e. g. if they relate to the opposite carriageway or are alongside the route). In the map display without active route guidance (location map), the traffic congestion symbols are displayed as being relevant to the route. Reading as text messages You can also have all of the traffic information received via TMC displayed. This information will cover an area within a radius of approx. 62 mi around your current vehicle position. Mark "Display travel information" in the "Congestion" menu. The first TMC traffic message on the list will appear. The number of the message on display and the total number of messages on to "page" the list will appear on the top line of the menu. [. . . ] 21 Selecting route options . . . . . . . . . . . . . . . . . . . . . . . 44 Selecting special destinations . . . . . . . . . . . . . 20 Selecting the automatic/day/night display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35, 59 Selecting the clock display . . . . . . . . . . . . . . . . . . [. . . ]