User manual BLAUPUNKT TP DX-R70 T CLASSIC

[. . . ] Long press: Starts the Travelstore function. 8 ESC button Confirm menu item and return to the display of the MENU or AUDIO main level. 9 DIS button Short press: Briefly displays alternative display contents (e. g. : MENU button (OK) Short press: Calls up the menu for settings. Long press: Starts the Scan function. 3 ENGLISH 1 button to remove the control panel (release panel) ; AUDIO button Sets bass, treble, balance and fader. [. . . ] The display shows "FM TSTORE" or "AM TSTORE". After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT or AM memory bank. Listening to stored stations u Select the memory bank or waveband. u Press the station button 1 - 5 < of the desired station. Note: The defined scanning time is also applied by the system to scanning carried out in CD and CD changer mode. Scanning receivable stations (SCAN) You can use the scan function to play all the receivable stations briefly. You can set the scanning time from 5 to 30 seconds in the menu (in increments of 5 seconds). Starting SCAN u Press and hold down the MENU button : for longer than two seconds. "SCAN" appears briefly on the display followed by a flashing display of the current station name or frequency. Cancelling SCAN and continuing listening to a station u Press the MENU button :. Scanning stops and the radio continues playing the station that it tuned into last. Setting the scanning time u Press the MENU button :. u Press the or button 6 repeatedly until "SCAN TIME" appears on the display. u Set the desired scanning time using the buttons 6. 13 ENGLISH When you have finished making your changes, u press the MENU button : twice. CD mode CD mode You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. Cancelling MIX u Press the 5 MIX button < again. "MIX OFF" appears briefly on the display and the MIX symbol disappears. Interrupting playback (PAUSE) u Press the button 3 <. "PAUSE" appears on the display. Cancelling pause u During the pause, press the button 3 <. Playback is continued. Scanning tracks (SCAN) You can scan (briefly play) all the tracks on the CD. u Press and hold down the MENU button : for longer than two seconds. For further information, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter. 15 ENGLISH Fast track selection Cancelling SCAN and continuing listening to a track u To stop scanning, press the MENU button :. The currently scanned track will then continue to be played normally. CD mode Configuring the display You can select from two display types for CD mode: · Track number and time · Track number and playing time To change the display, u Press and hold down the DIS button 9 for longer than 2 seconds. Ejecting a CD button 7 next to the u Press the CD compartment. Notes: · If a CD is ejected, the drive will automatically draw it back in again after approx. · You can also eject CDs whilst the device is switched off or whilst another audio source is activated. Displaying CD text Some CDs include CD text. The CD text might contain the names of the artist, album and tracks. [. . . ] 1. 3 kg Weight Subject to changes! Installation instructions · Notice de montage · Instrucciones de instalación · Instruções de montagem · · Installation instructions Safety instructions When carrying out installation work and making connections please observe the following safety instructions: · Disconnect the negative terminal of the battery!When doing so, please observe the vehicle manufacturer's safety instructions. · Make sure you do not damage vehicle components when drilling any holes. · The cross sections of the positive and negative cables must not be less than 1. 5 mm2. [. . . ]