User manual BLAUPUNKT TP DX-V MULTIMEDIA BNL

[. . . ] 14 Selecting a Track . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Quick Track Selection . . . . . . . . . . . . . . . . . . . 14 Fast Search (Audible) . . . . . . . . . . . . . . . . . . . . 14 Changing Display Contents . . . . . . . . . . . [. . . ] CD Changer The following Blaupunkt CD changers can be connected: CDC A 06, CDC A 08, CDC A 072 or IDC A 09. The use of an adapter cable (Blaupunkt no. 7 607 889 093) also allows the CDC A 05 or CDC A 071 CD changers to be connected. Road Safety Road safety has the first priority. Only make adjustments to your car radio when the traffic conditions allow. Familiarise yourself with the device before you start driving. You must be able to hear audible alarms from police vehicles, fire engines or ambulances promptly inside the vehicle. You should therefore listen at an appropriate volume when travelling. 6 RELEASE PANEL Theft Protection Your device has a removable flip-release panel to protect it from theft. The radio is of no value to a thief without this panel. Protect your device from theft by taking the release panel with you whenever you leave the vehicle. Do not leave the panel in the car, even in a hidden place. The release panel is designed for easy handling. Note: q To avoid damage to hearing, the maximum switch-on volume is "38". If the device was playing above this volume when switched off, it will switch on again at "38". When the setting process is complete Press the MENU button :. Muting During Phone Calls If your car radio is connected to a mobile telephone, then when the telephone is taken "off the hook", the car radio is muted. The telephone conversation or the speech output are reproduced via the car radio speakers. This requires the mobile telephone to be connected to the car radio as described in the fitting instructions. The device volume is muted to the preset mute level. Press the MENU button :. 9 RADIO OPERATION Radio Operation Switching on Radio Operation If the current operating mode is CD, CDchanger or AUX (only for Santa Fe CD31) Adjusting Station Search Sensitivity You can choose whether to search only for stations with strong signals, or whether weak stations should be included. Press the BAND button 2. or Press the MENU button :. Press the or button 9 until "SENS HI" or "SENS LO" appears in the display. "SENS HI" means maximum sensitivity, "SENS LO" means minimum sensitivity. When "SENS LO" is selected, the display shows "lo". Press the CD·C button 7 until "RADIO" appears in the display. Select Waveband/Memory Level This radio receives stations in the VHF (FM) waveband as well as MW and LW (AM) stations. Three memory levels are available for the FM waveband, and one memory level is available for each of the MW and LW bands. [. . . ] Please consult the section on "Setting Scan Time" under "Radio Operation". CLOCK - TIME CLOCK - Time Displaying the Time To display the time or button 9 to switch modes. When the setting process is complete Press the Press the button < briefly. Press the MENU button :. Display the Time When the Device is Switched Off But the Ignition On To display the time when the device is switched off and the ignition is switched on Setting the Time Press the MENU button :. Press the or button 9 until "CLOCKSET" appears in the display. Press the button 9. Press the MENU button :. "MENU" appears in the display. The time is shown in the display. [. . . ]